Hi .My quad plus is being delivered early next week and i was wondering if there is a original image when i first boot the receiver up ? Regards Rhurbarb
Hi .My quad plus is being delivered early next week and i was wondering if there is a original image when i first boot the receiver up ? Regards Rhurbarb
Will be openmips I would think
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
rhurbarb (10-05-14)
I better get reading up on this box as it seems different to my dreambox .Cheers Marty for the quick reply
Last edited by rhurbarb; 10-05-14 at 15:35.
Maybe have a look @
as there are a number of GB enthusiasts there. English section as well.Code:http://www.opensat4all.com/forums/forum/32-gigablue/
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
rhurbarb (10-05-14)
Just received mine - very nice piece of kit :-) running it on original firmware and all looks fine for what I want.
Any word from WoS as to how testing is going on the Quad Plus? I'm dying to get my hands on a VIX image for this
I am dying to get my hands on a Quad Plus when we get a Vix image
Joe_90 (16-05-14)
Same here, looking forward to when Vix will be released for the Quad Plus
Any update on this? Any estimated timescale of when we could see a quad plus image emerge?
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
I got a little impatient and unsure about the Quad and was not sure weather to wait for Apolo to be released on the Quad so
I have just ordered a Miraclebox Premium with Cable & Sat from the sponsors I should receive it on Tuesday
I thought to hell with it the VU+Duo2 is to Expensive
Solo se is not yet released
Golden Interstar Xspeed LX3 not yet proven and no vix image for it Yet
and I wanted a Box with cable capabilities and the Miraclebox Premium fitted the bill and was a good price so I bit the Bullet lol
dose any one know what size Hard Drive it takes I presume it will be a 2.5"
OK I will probably end up with a Quad Plus in the end but you never know the Miraclebox might just be good enough for me
I am very dissapointed by the Quad Plus at this time. I get the same transfer speeds about 10MB/sek as I did with Quad ;-( Abd yes, I do have Gigabit LAN and cables and switches etc. I get about 50MB/sek from my NAS.
Hi jerry, I'm surprised at that poor performance. I have had a Quad Plus since early April. My LAN is mixed 100/1000, but when I connect the Quad Plus to the Gigabit segment of my LAN and do file transfers via Filezilla to my Windows 7 machine (I do not have Samba installed, so need to use FTP) I can get up to 58MB/s from Quad Plus to Win 7 and almost 50MB/s from Win 7 to Quad Plus. This is through a TP-Link Gigabit switch and normal Cat5 patch cables. I wonder if your card is not syncing properly with your switch? You could try the following commands to check the link state if you telnet into the Quad Plus:
Code:gbquadplus login: root root@gbquadplus:~# dmesg | grep -i duplex eth0: Link up, 1000 Mbps Full Duplex root@gbquadplus:~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 3 Transceiver: internal Auto-negotiation: on Supports Wake-on: ags Wake-on: d SecureOn password: 00:00:00:00:00:00 Link detected: yes