Hi am having a bit of difficulty connecting my VU+ box to FlashFXP
can someone help me identify my host name ext
thanks
Hi am having a bit of difficulty connecting my VU+ box to FlashFXP
can someone help me identify my host name ext
thanks
Filezilla is much better, give that a try
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
Thank you
i found the ip of VU box and the hostname vuduo am getting there
Using FlashFXP 4.4.xxx
Open FlashFXP and hit F4 to open the site manager.
press the NEW SITE button, enter the name of your receiver into the box that pops up then press ok
Connection type = FTP
address = the IP address of your receiver
port = 21
Login type = Normal
user name = root
password = left blank by default unless you have setup a new password.
Then just press the apply button, this will save your profile so you wont have to enter the details every time. and hit connect.
It's literally as easy as that.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
yas am in Thank you
great its installed how do i edit it?
Edit what ?
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
the file to put my details in lol thought thats what i was doing
Highlight the file and right press ( right mouse button ), then select EDIT.
or Highlight the file and press CTRL -E
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
its ok my fault i forgot to upload my config file do i also upload the .list file too?
tried to edit it just opened with notepad its all garbled
i give up
think am getting somewere am getting an error no config found /var/keys i put in there 2 files one .list and the other .cfg
still am having problems
press the blue button go to softcam manager
is mgcam runnung ?
yes restart it
no start it
dont see mgcamd - install it
hope it helps
if you need help PM me as its a bit of a taboo subject
Last edited by copex; 17-03-14 at 19:16.
May i remind you that the same rules apply to the PM system as they do the open forum, and while we cant police the content of the PM system, we will take action against members where we are made aware of them breaching the site rules via the PM system.
Not accusing any one just a friendly reminder.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
skeggylad (17-03-14)