Hi
anyone help me get 28.2E back on my box I have some channels
cheers
daz12
Hi
anyone help me get 28.2E back on my box I have some channels
cheers
daz12
You have not mentioned what happened to cause 28.2 to disappear. I suspect you have done the usual, change satellite configs which resulted in the satellite being deleted. Is this the case?
I have uploaded a channel list for you. Transfer with Dreamset/Dreamboxedit or similar
http://www.world-of-satellite.com/showthread.php?2740-Latest-Vhannibal-E1-settings&p=269148&viewfull=1#post269148
Alternatively, just replace the satellites.xml.
Last edited by abu baniaz; 16-02-14 at 19:21. Reason: Added link to bouquet.
Cheers
How do I transfer it and how would I replace the satelites xml. thanks for ur help
daz12
In post 2 "Transfer with Dreamset/Dreamboxedit or similar" .Put these terms in your search engine
Dreamset guide
or
Dreamboxedit guide
If you transfer the chanenl list, it will automatcailly transfer the satellites.xml. If you want to transfer it mnually, you have to transfer it to /var/etc using an FTP program such as Filezilla
hi
still cant do it you couldn't give me more detail how to do it please tried filezlla cant get host name just need step by step guide
Thanks
Daz12
What do you want to do, transfer satllites.xml only or channel list?
which is best to get all channels back on i had all kids channels and sports etc which do you think
Cheers
Daz12
You have not said what caused the error in the first place. So nobody knows. Remember, you are the one who needs help. It is your interests to provide as much information as possible. Anyway, I would start with transferring the satellites.xml and checking the tuner config is correct. Hopefully the services have not been deleted.
Attached is a picture of filezilla.
window 1.
Navigate to where you downlaoded and extracted the bouquet that you have downloaded.
Window 2
Navigate to /var/etc/
You can type in "/var/etc/" where the blue arrow is, or you can click on var, then etc as indicated by the red arrows.
Window 3
Double click on satellites.xml
You should see it transfer to window 4
Hi
I must of wipe it off so I connect my computer to my box via the LAN lead than tranfer it am new to this as you can see thanks for helping me
daz12
Please use full stops when appropriate.
There is no need for direct cable connection between PC and receiver. PC connected to router via WiFi/Ethernet cable, receiver connected to router via Ethernet cable too.
daz12 (18-02-14)
The host is the ip off my box ?
daz12
Hi
tried that it is not letting me connect to the sever
Daz12
thanks all done