is it add service?
Screen Shot 2013-05-24 at 08.04.47.jpg
if so what would the settings be
i am on vix latest image
openwebif on 8001
transcoding on 8002
thanks
is it add service?
Screen Shot 2013-05-24 at 08.04.47.jpg
if so what would the settings be
i am on vix latest image
openwebif on 8001
transcoding on 8002
thanks
you need to add a service first then select it as a firewall rule. if you are looking to port foward then use this.
hxxp://support.herefilefile.com/entries/171529-How-to-Forward-Ports-on-a-NetGear-WNR1000-v2
Last edited by karl_everest; 24-05-13 at 14:26.
Okay i am stuck and need some help please. i Have
OpenViX3.0.664 kernel 3.3.8 installed on a Vu+ Solo2. I have setup a noip account. enabled OpenWebInterface set the http port to 1980 and the streaming port to 8002, i have installed inadyn and configured it and enabled the transcoding plugin to port 8002 (same as streaming port) everything works fine on my LAN. but when i attempt to stream via WAN it fails in the media player, i can access my epg fine but when i click on the tv to stream it fails, i have tried both media player and vlc player and neither has worked. Also i can download and play recorded programs fine
My problem is exactly the same as yours, everything works as it should on my LAN but for some unknown reason every time I switch to 3G I get an error on both VLC, Daroon and MX Player. Everything else on 3G works as it should - Channel Listings, Box Commands, Sending Messages and watching recorded programs all work perfectly. I even set up and Dyndns account just to see if No-Ip was the cause but no. If anyone has any other suggestions I'd love to try them as I have run out of ideas now.
Regards
Jigsy
Seems like everything is working now, no idea what I did but I get all channels playing at work no problem. My only two other problems are the sound will not come on when viewing channels and if I forget the stop the program in Dreamdroid I can't connect to the box again for at least 10 minutes and I have no idea why that is.
Sent from my GT-I9300 using Tapatalk 2
Hi guys,
I can stream to my (XP) PC pretty solidly using VLC from OpenWebIf, but I have an airplay dongle that ideally I would like to onwards push the stream to. For other things, iTunes enables me to push video reliably to my old 2005 plasma with the dongle in it. I am guessing there are other people on here that are streaming to ipads etc.
So I wondered if any readers of this thread have encountered and conquered this issue. I have 3 questions I wonder if anyone could answer.
1. Does anyone know if there are streaming apps compatible with Solo2 Vix 3. image to iOS that support the airplay push function?
2. Or as my dongle has an IP address, is there an option to 'send' from my Vu+ solo2 Vix 3.0 directly to the rendering dongle?
3. Is there a technique to stream from OpenWebIf to iTunes.... I try Open with iTunes.. function and I just get an audio track with great buffering and then like a tape recorded on fastforward play (remember those?)
I've just tested Vu+ player, great but no push. e2 Remote pro seems to support internal or GoodPlayer. dreaMote Lite I cannot 'see' an option to stream or in paid for dreaMote unless it is Custom Stream URL. I download more streaming apps but they don't appear available to selectin e2 remote. any suggestions?
Cheers
Resurrected Vu+Solo2 /1.2Mdish/TM2600/PannyGT50
Vu+ Zero/1.2M dishslave/28.2/EpsonTW5300
Firmware version: OpenViX 5.3.035 (2020-06-21) Driver date: 20190429 Kernel version: 3.13.5
Using Dreambox Live, now called Blackbox Live and £2.49 for iPad, does it stream the satellite radio channels? I use the Vu+ iPad app which is just fine for video but I can't get any of the radio channels, which are what I want most when I'm working in my shed.
Not sure about radio stations as I've never tried to stream them but an alternative is the free tunein app. Has has thousands of stations from all over the globe.
Hi, does anyone know how to port forward on the BT Home Hub? I've got to the relevant settings page but it says I have to choose a program to port forward. It doesn't seem like I can just create a port.
I found this through googling, but you don't say what version you are using
http://bt.custhelp.com/app/answers/detail/a_id/43715
Resurrected Vu+Solo2 /1.2Mdish/TM2600/PannyGT50
Vu+ Zero/1.2M dishslave/28.2/EpsonTW5300
Firmware version: OpenViX 5.3.035 (2020-06-21) Driver date: 20190429 Kernel version: 3.13.5
Mafi10 (14-11-15)
Hi, I've got it set up for using Blackbox on the iPhone. What software can I use for the laptop?
Mafi10 (14-11-15)
I just tend to use a browser at home. Vu+ on an android tablet and e2Remote pro on iphone.
Resurrected Vu+Solo2 /1.2Mdish/TM2600/PannyGT50
Vu+ Zero/1.2M dishslave/28.2/EpsonTW5300
Firmware version: OpenViX 5.3.035 (2020-06-21) Driver date: 20190429 Kernel version: 3.13.5
Mafi10 (14-11-15)
A couple of questions about this streaming.
1) If im at work and family are at home watching tv, can I stream a different channel?
2) basically same question but my kids both have an ipad, can they stream different channels at same time?
Mafi10 (14-11-15)
Mafi10 (14-11-15)