Hi there. Wonder if anyone can provide some advice. My TM Twin OE has been working perfectly since being set up by a friend a couple of months ago. But... last weekend it would not start so I rebooted and at 49% it gave me the message 'Your receiver has encountered a software problem...' and asked me to send the crash log to vixlogs. I did this but haven't heard yet. What do I do to fix it? Would be most grateful for any ideas. The content of the crash log is this:
<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Thu Jan 1 01:01:36 1970</crashdate>
<compiledate>Nov 1 2013</compiledate>
<contactemail>vixlogs@world-of-satellite.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX-Night-HD/skin.xml</skin>
<sourcedate>2013-11-01</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>duo</stbmodel>
<kernelversion>
<![CDATA[
Linux tmtwinoe 3.5.3 #1 SMP Fri Nov 1 22:47:47 CET 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=112M ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync slab_max_order=0 hwtypenum=0</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=tmtwin
build_type=0
version=3.0
build=775
drivers=N/A
date=20131101214319
comment=ViX
target=9
creator=openViX
url=http://www.technomate-support.co.uk
catalog=http://www.technomate-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.0 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</enigma2software>
<vuplussoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</vuplussoftware>
<gstreamersoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
10800k video mem
- double buffering available!
7560kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7e7ff0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TM-TWIN-OE remote control (native)" is a remotecontrol
Found 1 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 0000
eHdmiCEC: send message 84 00 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12776 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 1
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
found 19 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[Harddisk] enumerating network mounts...
Reading satellites.xml
removing internal link on frontend id 1
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
link tuner 1 to tuner 0
setting internal link on frontend id 1
slot: 0 configmode: simple
diseqcmode: diseqc_a_b_c_d
slot: 1 configmode: loopthrough
sec config completed
[Time By]: Transponder
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[SKIN] loading include: /usr/share/enigma2/ViX-Common/CommonSkin.xml
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: YPbPr, mode: 720p, rate: 50Hz
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
couldn't open /proc/stb/misc/12V_output
setLCDBrightness 25
setLCDBrightness 127
setLCDScrollspeed 150
setLCDRepeat 3
setLCDMode 1
Setting OSD position: 0 720 0 576
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
Plugin Extensions/WebInterface failed to load: No module named plugin
[XMLTVImport] autostart (0) occured at 92.217306
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
starting hotplug handler
wasTimerWakeup failed!
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Thu 01 Jan 1970 01:01:32 IST)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Thu 01 Jan 1970 01:01:32 IST)
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Thu 01 Jan 1970 01:01:32 IST
[XMLTVImport] autostart (0) occured at 92.332459
[XMLTVImport] WakeUpTime now set to -1 (now=92)
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
[Skin] Attribute not implemented: alphatest value: blend
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 695, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 542, in runScreenTest
profile_final()
File "/usr/lib/enigma2/python/Tools/Profile.py", line 54, in profile_final
IOError: [Errno 28] No space left on device
------------------------------------------------------------
(exit code 5)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>