Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 6 of 7 FirstFirst ... 4567 LastLast
Results 76 to 90 of 104

Thread: New box set up guide

  1. #76
    Rimmel's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2011
    Posts
    323
    Thanks
    64
    Thanked 68 Times in 13 Posts
    Quote Originally Posted by judge View Post
    The same place as all our images, cams & tutorials...
    http://www.openvix.co.uk/
    Handy if it was mentioned in the tutorial for people who don't know or are new...
    Is definitely the most misspelled word on the internet?

  2. #77

    Title
    Junior Member
    Join Date
    Oct 2013
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Fantastic tutorial. Many thanks

  3. #78
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    Quote Originally Posted by Rimmel View Post
    Handy if it was mentioned in the tutorial for people who don't know or are new...
    I put this tutorial together well over a year ago which is before the openvix site even existed.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  4. #79
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    Is it possible to update the guide? Basically remove the duo flashing instructions and replace with something similar to: Download image and bootloader (if necessary) from openvix.co.uk. Flash receiver according to receiver specific instructions.
    I have not seen any recent posts by Josh_G, so can't ask him.

  5. #80
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    Quote Originally Posted by abu baniaz View Post
    Is it possible to update the guide? Basically remove the duo flashing instructions and replace with something similar to: Download image and bootloader (if necessary) from openvix.co.uk. Flash receiver according to receiver specific instructions.
    I have not seen any recent posts by Josh_G, so can't ask him.
    Yes I will be doing a major overhaul of my origin tutorial soon. It has been on my to do list for a while. I will remove all receiver specific advice instead making it ViX specific.

    Sent from my GT-I9300 using Tapatalk
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  6. The Following User Says Thank You to Larry-G For This Useful Post:

    abu baniaz (20-10-13)

  7. #81

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    HELP

    I have a the xp1000 and until recently I had full list of suppliers from my mortised dish now I have very few, I did a full scan and it found loads but when I go to channel listings a lot of stuff missing Al jazeere etc what can I do to get all back?

    Regards

    Rab

  8. #82
    gbok's Avatar
    Title
    Member
    Join Date
    Dec 2013
    Location
    The Hague
    Posts
    37
    Thanks
    30
    Thanked 1 Time in 1 Post
    Thanx for this guide. It has helped me make the leap and get rid of my sky account.
    Gonna get a Linux reciever (TM Twin OE ) and set it up for the free to air stuff.
    I live in The Netherlands and hope this wont cause me to many difficulties.
    Cheers Dennis

  9. #83
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    We have a number of users from the Netherlands including our Very own Rob van der Does, so you should be fine operating a system there without too many issues.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  10. The Following User Says Thank You to Larry-G For This Useful Post:

    gbok (30-12-13)

  11. #84
    gbok's Avatar
    Title
    Member
    Join Date
    Dec 2013
    Location
    The Hague
    Posts
    37
    Thanks
    30
    Thanked 1 Time in 1 Post
    Well here goes. I just ordered the VU+ duo reciever to replace my s*y box.
    A lot more hassle than getting a Freesat non Linux receiver.
    Looks like a lot more fun though! .
    With the help u people give (and a lot of searching and reading) hope to have many pleasant hours of tweaking and enjoying good quality satellite tv.
    Cheers Dennis

  12. #85

    Title
    Junior Member
    Join Date
    Jan 2011
    Posts
    2
    Thanks
    5
    Thanked 0 Times in 0 Posts
    This is great...much appreciated. Was wondering if there is a NEXT CHAPTER to recommend an idiots guide to set up funky plugins, etc, etc (download sites) and what they do so we can really enjoy our box. I see so many options in many forums but no real positive feedback until Ive come across this thread. So basically recommened plugins for everyday use and cool features with descrition and download site would be really welcome by all here I guess! I can truely see this thread being a big hit!

  13. #86

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2014
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 1 Post

    can't use notebook++

    will textwrangler on mac work for cam install instead of notebook++


    Quote Originally Posted by josh_g View Post
    I have seen a lot of request for help setting up new Enigma 2 boxes and found this when setting up mine.. i have put it all in this post and can it be made a sticky to help all those that need it!! thanks for Pheonix for putting it together.

    ===



    How to set up your new Vu+Duo. (also applies to other VIX boxes


    First let me congratulate you on purchasing what is easily In my honest opinion, one of the best supported satellite receivers on the market.
    You have entered a world of many possibilities and I personally welcome you to my hobby.

    ok so you have just received you new shiny Vu+Duo and you want to watch some TV but you dont know where to start !.

    This tutorial aims to show you what you need to do to setup your new receiver from scratch to the point where you can at least watch FTA/FTV ( Free to Air and Free to View ) channels via Sky uk otherwise known as 28.2 East.

    [COLOR="#FF0000"]Areas covered will be as follows.[/COLOR]
    Unboxing the receiver.
    Flashing the Bootloader and Image
    Using the setup wizard to setup network etc.
    Loading a Bouquet or Channel list.
    Setting up a EPG or Electronic Programe Guide
    Setting up a Softcam to use with a SKY UK FTV or Free To View card.


    Getting started.

    1. unbox the receiver ( yes i know this is obvious but bear with me ).
    2. Along with the receiver you should also have in the box a few other things as listed below.
    a. Remote controll and batteries
    b. Vu+ instruction manual
    c. HDMI cable
    d. Internal Hard drive fitting kit including the cradle, screws, rubber grommets and power, data connection leads. ( These may be inside the receiver it self )

    Before we go any further i am going to assume you have a HDD you wish to use with the receiver if not you can skip this step and return to it later.
    If your using a new freshly unboxed HDD you can go ahead and install that into the receiver now, However if you are using a used HDD make sure it is formatted to FAT32 and all previous partitions removed.

    To eliminate confusion as i have seen many forum posts about this the HDD sits on top of the cradle and the cradle then attaches to the body of the receiver.

    OK so now the HDD is installed and the receiver has been closed back up we can start connecting the various leads and cables.


    Flashing the Bootloader and Image


    The receiver will come with a standard factory produced image ( The firmware or operating system for the receiver ) unless you have asked the retailer you purchased it from to load a specific image first, For the purposes of this tutorial i will assume this is the case and will be flashing the latest ViX 2.3 image with the Linux 3.1.1 kernel.

    Before we get that far however you will need a few things.
    1. A USB stick / key formatted the FAT32
    2. The newest Vu+Duo bootloader ( duo_cfe_3_0_usb.zip )
    3. The ViX image ( Current public version is ViX-2.3.204-vuduo_usb.zip )
    4A. A little patience and some ones hand to hold if you have a nervous disposition.
    4B. A clean pair of underpants ( just in case ).

    To start we are going to first flash the Bootloader ( duo_cfe_3_0_usb.zip )

    1. Power the receiver down by the power switch at the rear on the rear of the receiver.
    2. unpack the bootloader file and place the folder ( vuplus and it's contents ) onto the USB stick. ( for this i use 7zip but winrar will do nicely. )
    3. place the USB stick into any USB port on the receiver then power the receiver on by the power switch at the rear of the receiver.



    IMPORTANT
    WARNING NEVER remove the USB stick from the box while flashing either the bootloader or any image without first seeing the VFD prompt to do so and only then after powering the receiver down first.
    Failure to do so could lead to a very expensive hardware failure, more commonly known as a "BRICK". As your expensive receiver is now effectively now only useful as a house brick.

    you should now see a message on the VFD display of your Vu+ Duo that the USB stick is being read once this part is complete you will see a message telling you to remove the stick and reboot.
    Power off the receiver then remove the USB stick, once again format the stick to FAT32. Now decompress the image file ( ViX-2.3.204-vuduo_usb.zip ) again placing the folder named vuplus and it's contents onto the stick and follow the same procedure as above for flashing the bootloader.

    you should see the following displayed on the VFD one at a time during the flahing proccess.

    Reading USB, Erasing Flash , Programming , Finnished Remove USB and Reboot

    Note that while the bootloader took only a few seconds to flash to your receiver, a full image flash will take a few minutes. Once this has completed and you see the VFD prompt you can again power down the receiver and remove the USB stick.
    you can now power the box back on and allow it to boot, This process may take a few minutes but once complete you will be presented with a simple setup Wizard screen that will guide you through the various setup options helping you get started.


    Setup Wizard




    The First setup screen you see should be the Video input selection screen. Here you are asked to select the input port for your Tv as below.
    HDMI
    Scart
    YPbPr

    along with the ability to select your language via the red button, the default language loaded being English.

    For example i select the HDMI PORT i am then asked to select the video mode from several choices.

    720p
    1080i
    576p
    480p
    576i
    480i

    I am selecting 720p but this can be changed later if needed. once selected you then greeted with a language selection screen.

    you will now be presented with the restore wizard. This can be used to restore settings backups made from a previous installation using the ViX backup manager, as this is a new setup i am selecting the Exit restore wizard option.
    Again you will now be presented with another wizard that will allow you to set up some more of the basic features of your receiver.
    you can exit from this or follow the wizard i am following the wizard.

    The next screen asks me to setup tuner A,by pressing left or right on the remote.
    as i am using a fixed sky uk dish for this setup i will choose as follows.

    configuration mode. Simple
    Mode Single
    Satellite 28.2E Eurobird 1..Astra 1N/2A/2B/2D
    Send DiSEqC No.

    As I am using both feeds from a the same source ( a octo LNB I will set both tuners up with the exact same settings ).

    now we are asked if we want to perform a automatic or manual scan, for this part i will select no as i will be loading a bouquet pack later.
    and i select no to parental controls.

    Setting up the internet connection.
    This next part of the wizard asks me if i want to set up the internet connection i select yes ( my duo is connected to my broadband router via a cat5 network cable )

    use interface Yes
    USE DHCP if yes the box will scan your router and assign a ip address automatically, or if you select no you can set up a fixed ip address manually, i select yes for now.
    thats it the box is almost setup.

    now to setup a few things before we go any further.

    The first screen you will see once out of the setup wizard is the channel list, however as it has no channel list or bouquet loaded yet this will be blank but we can come to that later.
    you may notice that the menu or OSD ( On Screen Dispaly ) on your tv screen does not quite fit it may be stretched or off to one side, dont worry this is easy to correct as so.

    first exit out of the channel list screen by pressing exit on the remote. you should see the Vu loading screen.

    To set the OSD
    menu > setup > OSD > OSD SETUP
    here you can use the up / down buttons to select each option and the left / right buttons to adjust the setting them selves. once you are happy that your OSD is setup press green to save these settings.


    Loading a Bouquet or channel List


    To load a bouquet or channel list to your receiver you need a few things.
    1. The IP address of the receiver menu > setup > system > network > Device setup > Adapter settings ( write down the ip address in this case we have 192.168.0.6 )
    2. A bouquet pack or channel list, for this tutorial i am using the latest Silverfox E2 ( enigma 2 )pack.
    3. a bouquet editor. i am using DreamboxEdit 5.0.0.3
    4. a copy of winrar ( I personally use 7zip and it's free which is also a good thing )

    before we go any further install DreamboxEdit ( DBE ) to your computer.
    For this tutorial i am using the silverfox bouquet which is a special set that mirrors the SKY UK channel line up matching the channel numbers to those of a official SKY receiver. to set this up correctly you need to make some changes to DBE before you even download the bouquet pack.

    Launch DBE
    press tools > options > advanced. make sure the heading allow duplicate entries in ( user ) bouquets is selected then restart the program.

    now we need to setup a profile for your receiver in DBE
    tools > options > profiles.
    first press the new profile button and you will see a new profile appear in the left hand coloum. click on this to open it out.
    enter the ip address you noted down earlier keeping the default ports for HTTP and FTP as they already are ( 80 and 21 )
    under the heading username on dreambox enter the name root
    and for the password type password ( this is the default password until you change it ).

    you can also enter a name for this profile, then press the save button. make sure you have it set as enigma 2 under the filepaths heading by pressing the enigma2 settings button.

    Take the bouquet file you downloaded and uncompress it using winrar to some where you can easily remember, I create a folder on my desktop ( this can be deleted once the bouquet is loaded to the receiver ).

    press file > open and navigate to the location you decompressed the bouquet to. then press ok to load the files.
    now in the bottom left hand corner select the profile you just created then press file > fast FTP upload. you may need to reboot the box after this step so the settings take hold.

    In the new version of VIX you can now you ABM (autobouqetmaker) that will create the bouquet automatically for you

    you can do this buy going to Menu>setup>service searching>autobouqetmaker

    you set this up in much the same way as EPG choose your download time and how often you want it set. make sure you choose your region and make sure freeview and sky is selected (you can also choose skyire)

    Setting up a EPG or electronic program guide.



    First of all I would recommend you use a dedicated USB stick for this process, I my self use a Sandisk Cruzor Blade 4GB stick for this purpose as it is very small and easily hidden away behind the receiver.

    Format your USB stick to FAT32 from your computer.

    Place the USB stick in to any of the USB ports on the receiver. ( I use a rear port as it's not in view and therefore hidden away. also as it's behind the receiver the stick is not so easily damaged. ). Then reboot the receiver.

    when the receiver has booted up, navigate to the mount manager. Blue button> ViX> mount manager. your USB stick should be shown as Mount: /media/usb if it is not press the green button then highlight the stick and change the mount via the left and right buttons. Then press the green to save.

    Exit from this screen using the back button and navigate to menu> setup> system> EPG.

    you now have several options to setup your EPG using either CrossEPG or Rytek or both depending on your setup.

    To setup CrossEPG as your EPG

    press settings
    change the EPG location to /media/usb using the left and right buttons. then press green to save.
    scroll down to CrossEPG then press ok, Now scroll down to scheduled download and change this option to once a day then select your preferred scheduled download time, best pick a time when you wont be using the box. I use 04:15
    you can leave the other options at their default values. press red to go back.

    Now scroll to OpenTV providers and press ok. Highlight and select The sky uk options so you see a green tick next to them, then press the yellow button to download the epg. you will be taken to a radio page where the epg will download. This step will take a few minutes to complete.
    You can select to use both 28.2 and 28.4 east in the settings but this consumes a lot of memory and is not needed only select the one that correspinds with your Bouquet pack. so for example if your bouquet points to 28.2 east select this option, The same goes for a bouquet that references 28.4 east.

    To setup Rytek as your EPG

    Select XMLTV-importer then as above set your preferred download time and set the daily automatic import option to enable. you can keep all other options at their defaults.
    Now press blue and tick all the sky uk options once done press green to save. You can now press manual to download this EPG again as with CrossEPG This will take a few minutes, but once done you should have a fully working EPG setup.

    Alos not that if you use Rytek as your EPG provider you must have a active internet connection to the receiver as it needs to connect to the internet to download the EPG data. If however you use CrossEPG you do not need a active internet connection as it uses the same source as SKY uk for it's EPG ( a radio channel previously known as the hip hip channel ).



    Setting up a Softcam


    In this part of the tutorial I am going to show you how to setup CCcam to work with a Sky uk FTV or Free To View card. We will not however show you how to setup a softcam for any thing to do with Card Sharing, If this is what you are looking for Use GOOGLE.

    Before we go any further you will need a few things.
    ( you can place the card in the receiver now using any of the card reader slots but making sure the chip is face down )

    1. The softcam you intend to use I am using CCcam for this tutorial.
    2. A suitable FTP program, For the purpose of this tutorial I am using FileZilla as it is a free program.
    3. A Sky UK FTV card, a deactivated White sky card will work here.
    4. A copy of Notepad++ ( you can use the built in windows notepad program but it gives mixed results )
    5. Don't forget those clean underpants.

    First you will need to download the Softcam a copy of which can be found here.


    Code:
    http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html I my self am using enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk but any version will work.

    You will also need to download Filezilla, a copy of which can be found on the forum or direct from the authors here.



    Code:
    http://filezilla-project.org/download.php?type=client You want the Client version and not the Server version.

    And of course not forgetting Notepad++ which can be downloaded here.


    Code:
    http://notepad-plus-plus.org/download/v5.9.8.html making sure your receiver is fully connected to your network and you have a copy of the IP address for the receiver you can proceed to the next step.

    Install Filezilla onto your PC / laptop allowing any access your firewall asks of you, then launch it once installed.

    For this step i am going to use the Quick connect option but you can at a later date create a profile for your receiver so you can connect at the press of a button or two.

    Along the top of the program you will see the following boxes.
    Host: ( enter the IP address of your receiver here )
    Username: This is set to ROOT by default so enter that.
    Password: by default this if left blank or password, unless you have changes this. for now enter password.
    Port: The default port is 21 so enter that then press the connect button.

    If all goes successfully you should now be connected to your receiver. the boxes on the left of the program are your PC those on the right are the internal file structure of your Receiver. navigate to the TMP/ folder on your receiver and drag the softcam file ( must be in .ipk format ) to this location. once done you can exit from Filezilla. ( although you will need to use it once more before we are done ).

    On your receiver navigate to the ipk installer. this can be found as so. Blue button> ViX> install local extension. If your file transfer via filezilla went correctly you will see the file listed here. Highlight this file and press the green button to install the file, you should see a conformation box just follow the directions selecting yet to reboot once complete.

    While the receiver is rebooting install and launch notepad++
    make a new file by clicking on File> New. you do not need to enter any thing into this file for use with a FTV card but the file is needed by the cam.
    with this new file open again click on file but this time select the save as option and you will see another box popup.

    In this new box select the location you wish to save this file to using the icons on the left hand side then under the File name heading enter the file name as CCcam.cfg Making sure it is this exact spelling as it is case sensitive then under the heading Save as type select the following All types (*.*) and press the save button. Once again open your FTP program and login as above but this time navigate to /ETC on the receiver and copy the file you just created there, exiting the program once done.

    Now we can activate the Cam via the blue button. Blue button> softcam manager. press green to start the cam and blue to enable auto start.

    Thats pretty much it. you should now be setup to use your Sky uk FTV card Via CCcam.



    So there you go, If you have made it through this tutorial and not needed to use those spare pair of underpants. Give your self a huge pat on the back and maybe go for a cuppa. you deserve it.

    Big thanks to Pheonix for putting this together and letting me re-post it!!

  14. #87

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2014
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 1 Post
    hi on setup i accidently used oscam instead of cccam in softcam setup can i just overwrite or do i need to delete oscam first then re install ccam
    or can i just add cccam to file
    Thanks

  15. #88
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    In softcam manger, you select which cams you want to start. You do not have to remove it. You can do if you want to.

  16. #89

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2014
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 1 Post
    Thanks sorry for multi posts just lost the plot a bit

  17. #90

    Title
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Thanks so much great help
    Regards
    pete

Page 6 of 7 FirstFirst ... 4567 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.