I have a vu solo, might be a clone..? wife hit update on box, it went black screen, i have tried reflashing it goes through motions etc then flashes green, but nothing comes up, still black screen..?
I have a vu solo, might be a clone..? wife hit update on box, it went black screen, i have tried reflashing it goes through motions etc then flashes green, but nothing comes up, still black screen..?
you posted in the solo2 section so is it a solo2 or a solo ?.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
yes the solo is a single tuner, the solo2 is a twin but with a new CPU more flash and memory and other enhancements etc.
As your unsure if the unit is a clone we should concentrate on establishing if it is indeed a clone or not before going any further.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Vu Duo 4K - Vu + Solo4K - Vu + Uno4K - Vu+Uno - Vu+Ultimo4K - Vu+ Zero - Vu+Solo-SE (In Black Evo ) - PrismCube
Try an older build from http://openvix.co.uk, if that works & the latest ones don't, the chance is you have a clone & support will end there, sorry.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Clabs (04-12-13)
you can download the CFE otherwise known as the bootloader from here,
http://openvix.co.uk/index.php?dir=Bootloaders/
Make sure you only use the one for the Vu+ Solo, if you flash the wrong one it will kill the receiver, the flashing process is the same as for the image via USB.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
What is a bootloader, and what does it do?
CFE/Bootloader From Wiki...
Common Firmware Environment (CFE), pronounce it 'cafe', is a firmware interface and bootloader developed by Broadcom for 32-bit and 64-bit system-on-a-chip (SOC) systems. It is intended to be a flexible toolkit of CPU initialization and bootstrap code for use on embedded processors (typically running on MIPS32/64 instruction set cpu's found in Broadcom SoC's). It is roughly analogous to the BIOS on the IBM PC platform. Its source-code is available on Open source license from Broadcom. Common embedded system alternatives include Das U-Boot.
Its main responsibility is to initialize CPU's, caches, memory controllers, and peripherals required early on in the power on stage. It typically incorporates several built-in device drivers for SOC peripherals, it has several console choices, including serial ports, ROM emulators, JTAG, etc. Just like in other boot loaders environment, variables are commonly configured in persistent storage to create auto boot options. It also has support for network bootstrap.