You can activate debuglogs at any time. If you have debuglogs de-activated, they will indeed not be produced.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
OK I'll check that tonight when I get in from work (I normally have it switched on). If it isn't on I'll give it a whirl and see what happens.
Don't forget to reboot the box once debuglogs have been activated (otherwise you still get no log).
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
The epg problem has been fixed by upgrading to 776 for most of the boxes but not for ET9200. I have a ET9200 and will to get a log of the failure. Does anyone know how to enable the log and the log location please?
I assume it's the one in /var/log/messages?
Thanks
Sent from my GT-I9505 using Tapatalk
Menu -> Setup -> System -> Logs -> Settings -> Enable debug log = yes.
Restart E2 & try to download the EPG.
The debug log will be in /home/root/logs/ by default.
sunday96 (07-11-13)
This the only log that's there.
Enigma2-07-11-2013_19-21-10.log
I can't see anything wrong.
Maybe somebody else?
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Sorry not been back with more information on the epg but I ended up with another problem of the flash memory filling up that took me tonight to sort out see here
I'll give the newer build a try as soon as I get chance as didn't know there was a 776 available now.
Thanks.
i cant get a log either.
im staying away for now, with an old image until this is well and truely nailed, nothing wrong with old EPG method to be honest - taking up too much time
shouldnt u pull 775 until you get a better and more positive response.
how many happy 775+ users are there>???
Last edited by manikm; 07-11-13 at 23:57.
There seems to be a lot of:
Which I don't have in my logs...Code:Entry for 28,2? not in Rotor Table found... i try gotoXX? siteLatitude = 55.000000, siteLongitude = 7.000000, 28.200000 degrees PolarmountHourAngle=156.848941 RotorCmd = e173 RotorCmd e173, lastRotorCmd ffffffff set rotor timeout to 360 seconds prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1178 mhz OURSTATE: tuning [CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1 [CrossEPG_Wrapper] -> FRONTEND 0 [SEC] set static current limiting KEY: 352 OK set sequence pos 3 [SEC] setVoltage 1 KEY: 352 OK [SEC] sleep 900ms [CrossEPG] TUNING [CrossEPG_Wrapper] <- OK [CrossEPG_Wrapper] <- OK [CrossEPG_Wrapper] <- OK [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING set sequence pos 9 [SEC] invalidate current rotorparams [SEC] sendDiseqc: e0316ee173(?) [SEC] sleep 1000ms [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING set sequence pos 3 [SEC] setTone 1 [SEC] sleep 10ms [SEC] setFrontend 0 setting frontend 0 [SEC] set timeout 1440 [SEC] sleep 250ms [CrossEPG] TUNING [CrossEPG] TUNING [SEC] locked step 0 ok set sequence pos -3 [SEC] sleep 250ms [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING [SEC] locked step 1 ok set sequence pos -3 [SEC] sleep 250ms [CrossEPG] TUNING [CrossEPG] TUNING [SEC] locked step 2 ok set sequence pos -3 [SEC] sleep 250ms [CrossEPG] TUNING [CrossEPG] TUNING [CrossEPG] TUNING
im having one more go now! before going to bed!!
2 tuners - 1 motor, 1 28.2
i use 13.0e and 28.2 open tv epg
i will update to latest, once 775 finishes installing.
getting log now chief
watch this space
only 1 happy user, tut tut....
ok
tuners setup , channel list installed
updating to 778
no plugins or restores...
rebooting