D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Ah Ok I must have tried to flash with the Vix HD800SE image and I have the PLUS model.
I have since tried the bootloader and the Openmips Image for the HD800SEPLUS however the receiver just doesnt acknowledge the USB stick. Before the USB stick used to light up when I first switched the receiver on, now I dont get any lights on the USB stick when inserted into either the front or rear ports and the receiver just says BOOT on the display. Is there any other way to get into the receiver?
Thanks for your quick replies...
Is there any way to access the Gigablue HD800SE+ as the USB doesn't seem to be working or is the unit faulty? Just got BOOT on the display and the red light. No matter what I do I can't get beyond this point...
The unit is not faulty but if you loaded the wrong image you have likely corrupted the bootsector basically what is more commonly known as bricking it. In such cases the unit needs to be J-tagged back to life but i'm not sure if a J-tag exists for this model yet.
you may need to speak to the sponsor to see what he says.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
biglandy (29-10-13)
When you say sponsor who would that be?