I have a problem which prevents me from using my TM Twin which is probably a hardware issue but thought I'd see if any of you here had experienced the same. My TM recently started switching completely off (always overnight) from standby mode. It wasn't a big problem as all I needed to do was switch it back on from the front button, but the last time it happened it would not come on at all and I have been getting the message (on the display)..."starting" followed by a zero moving backward & forward. I've tried all the obvious stuff like switching on/off from the rear rocker switch, disconnecting from the power supply & leaving the TM off overnight, but nothing works. The only thing I can think of that might have caused this condition is that I recently upgraded the software via the settings facility for performing this function. I've emailed Technomate twice without reply and am going to phone them but thought I'd put it on here first to see if anyone is familiar with this problem Thanks in advance for any advice offered.