Hi,
Please help if you can.
At the moment I have the following connection;
SOLO2 Connection:
1. My connection from Solo2, LNB1 goes to motor and then to LNB port 1 on the dish (motorised LNB port1)
2. My connection from solo2, LNB2 goes directly to LNB port 2 on the dish.
My Tuner configuration is as follows:
1. Tuner A: Positioner: USALS
2. Tuner B: Second cable of motorized LNB Tuner A:
With the above connections and set-up I can tune to any satellite using Tuner A only.
However, what I would like to do is to view a channel, say from Tuner A and record from say, Tuner B.
I know is possible but at the moment I cannot work this out.
Can anyone provide any step by step instructions how this is done please?
Your help will greatly appreciated.
Kind Regards,
Giorgos.