Anybody help with this problem.
I upgraded the the new vix software and now when a recording starts the station being watched judders and hicks till you go down/up a channel and back.
Anybody help with this problem.
I upgraded the the new vix software and now when a recording starts the station being watched judders and hicks till you go down/up a channel and back.
Which image number, latest stable release is 739. Did you upgrade through remote or did you USB flash?
we need to know the exact image build you are using ( latest build is of no help due to the frequency of releases ).
Menu> Information> About> to find this.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
It seems that I have old software not new thanks for the help I thought the software I down loads two days ago was the latest will see about the upgrade tomorrow . Thanks again for the replies..
This what I've got
Kernel 3.5.3versions 3.0
Build 338
if you need any help flashing the receiver etc just let us know and we will see what we can do to help.
I have a series of tutorials for the Technomate OE range of receivers that will help in this area.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Are there any images that do not have image stuttering problems or is this just normal? The stock and latest VIX images are unwatchable.
TheRealMike (20-09-13)
as judge says the current Build 742 with the latest kernel and drivers has no issues with recordings or juddering, I have this on 3 different TM-OE receivers and all are working great. ( Twin - 2T - Nano )
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I am running 729 from the start of this month.
Make a settings back-up so & flash the image from http://openvix.co.uk
You can restore the settings in the First Install Wizard & all should be fine.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Updated - I did a full reset and its pretty much as bad as before. SNR is 89% and BER is 0 so I don't think its a signal level problem. It stutters on live viewing, it does not appear to matter if it is recording or not. It starts off bad and improves over time. This is on BBC HD or SD from 28.8E.
I did a full reflash, rescan and everything - this image is certainly more stable. However, the remaining problem is limited to periodic glitching and is looking more like a tuner issue. I suspect either the LNB is faulty or in some way disagrees with this receiver. The same LNB/Dish was and still is fine when used with an earlier non-HD Technomate. Luckily I still have a Sky HD setup and its fine on that dish, so I am wondering if these new tuners are causing issues or just more sensitive to deviant LNBs. Its not just HD channels but also SD channels that work fine on the older RX but not on the TM-twin.