Try an older build, not sure what build the VU drivers were updated in.
Also, have you a scart cable to check output with?
Try an older build, not sure what build the VU drivers were updated in.
Also, have you a scart cable to check output with?
ok gents i will do, thanks for all the help so far
Do you know which image build it was on prior to the update ?,
go here http://www.openvix.co.uk/index.php?dir=Vu%2BSolo/ and try several builds make note of the build numbers you try and the results and let us know how you get on.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
vix wouldnt load or ? got as far back as 726, tried BH whih gave me my screen back, will try latest of vix now,? fingers crossed
We're going around in circles here...
Try an older build as suggested, Even build 600, oldest available on http://www.openvix.co.uk/index.php?dir=Vu%2BSolo/ would do.
Don't restore anything, let us know if it works.
If not, try a scart cable & let us know if that works.
Try going further back in the ViX builds to say 688 - 700 and see if those versions load, if it does then it's the drivers that are causing you issues.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
tried 702, as its had most D/L but still no joy?
BH worked just seems bizarre or im doing something stooopid
ok 600 works , can i recover earlier backups from previous issue?
this all started on from an online download from vix itself.
i can ftp also... please advise if i can get earlier setup, ? and what folders to look in
thanks in advance
Hi Mate
ok if you managed to get back image in the setup did you get any option to restore settings if so files you need to look at are
user/softcam your main CCcam bin
Var/etc for the other 4 CCcam files which includes your .cfg the one that allows you connection to whoever it was
and make sure you have var/keys data too
make sure you update to piror build that crashed your box ... nobody has said its a clone so prob just a glitch one can hope in the install biggest problem with these boxes is like computers when they hang updating people think somethings wrong and start to tinker pulling plugs etc you have to let them do there thing
new image, all done thanks folks
Hi Pheonix,
I have the same issue in my Vu+ Solo but i found out that its a clone Vu. What should i do? can i fix it or not?
Thnx
vu77 (24-10-13)
thnx for your reply, i will sell it and buy the "non clone" Vu solo 2.
cheers
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.