In Bouquets list press menu and enable move mode select and move. Once done menu and disable move mode.
In Bouquets list press menu and enable move mode select and move. Once done menu and disable move mode.
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
samhp (30-07-13)
Is the most actual version still in post #1?
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Getting this error, anyone know what it means??
terminate called without an instance of std:ut_of_range
yes, but there was a later autobouquets binary that fixed missing ROI itv channels "AB_201303010205_ROI_ITV(fix_mipsel-sh4).rar", and the custom.txt will be out of date with old BBC channel swap numbers.
the next version is not to far off complete, there is an unfinished debug test version that i could post for you to test.
it has a few extra menu items that would need adding to your recent vix skin mods.
if you want, i can post a current debug test version here so you can try the new proposed menu items?
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
debug testing version: work in progress!
backup you bouquets first, as you are using this testing version at your own risk of losing your current bouquets
backup your current /usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets folder and replace with this one,
chmod 755 autobouquetsreader and autobouquets_e2.sh
restart engima2 to initialize plugin.
dvbsnoop dependency has now been removed, so you dont need to install dvbsnoop to test this.
tuner setup can be changed at top of autobouquets_e2.sh.
new option to add extra channels to 'Other' bouquet, also adds testing channels.
custom_swap.txt should handle channel positions below 101 and above 999 now.
supplement.txt file not implemented yet in this version.
custom_order1.txt file not implemented yet in this version.
let me know if about screen is ok with regards to gpl or if it need changing in any way?
Hmmm, screen hangs at 'AB is initializing your system, please wait.....'
Of course I obeyed that order, but after 10 minutes I found it enough......
And that's all (apart from the fact that AB continuous to use some 50% CPU).Code:[AutoBouquets] fallback to default translation for AutoBouquets E2 for 28.2E Console: executing in run 0 the command: /usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/autobouquets_e2.sh 4101 01 N N N Y N N Y N N Y 2 ---- opening lame channel db reading services (version 4) loaded 12292 services
After init 4/3 it turned out that my first bouquet (not created by AB) was gone.
Last edited by Rob van der Does; 30-07-13 at 16:17.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
hmmm...thats a new one, the initializing part of the script has been in last few versions without a single bug report like yours. i just tried deleting my lamedb and then ran the plugin again and it displayed 'AutoBouquets is initializing your system, please wait.....' as you say, but it then auto created a new lamedb and auto zapped to the preset service before continuing the scan for bouquets 60 seconds later just as it should have done.
did you already have 28.2e bouquets on you system and were you viewing a valid 28.2e channel when you ran the plugin?
what was your setup when this happened so that i can try to replicate this also?
you should be able to bypass this for now by turning off the scriptcheck option and zapping to a valid 28.2e channel before running the plugin while i look into it.
if anyone else has had this issue in this verison or earlier versions, let me know, thanks.
1- The previous version (enigma2-plugin-extensions-autobouquets-e2_201303010205_mipsel.ipk) worked OK;
2- I do have my own 28.2 bouquet;
3- I was watching a channel on 19.2E when I activated the plugin.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
LraiZer (31-07-13)
so can you confirm that you can watch 19.2E using the 201303010205 version and it will auto zap to the default 28.2E service and scan for bouquets?
but if you use the debug testing version, and the exact same set of bouquets and lamedb that worked with the 201303010205 version. when you watch 19.2E it does not zap to the default 28.2E service, and instead of attempts to initialize your system even though it already has a working set of 28.2E bouquets and lamedb?
i will have to look at any subtle differences between the previous initialization code and what is in the debug testing version as both seem to work just the same on my test box, thanks for the feeback.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
LraiZer (31-07-13)
thanks, to be on the safe side, i may revert to the original method of earlier plugin versions by just popping a msg to user, asking them to zap to active 28.2e channel before any further processing can be done instead of attempting to auto initialize the system for them. i do not want to have this feature, if it only works 99%.
The 20130301 version zaps to the sky intro channel and then back without a problem, always has for me.
My test to re-confirm this was done as follows: Transferred a channel list for hotbird only, restarted the receiver. Whilst on a 13 east channel, executed AB via blue button. Was fine. Repeated and used AB via main plugin screen, also fine. This was with the following tuner config.
Tuner 1, single, 28.2
Tuner 2, diseqc 13/28.2/none/none
TM Twin, build 706
Repeated with the following tuner config
Tuner 1 = not configured
Tuner 2 = Simple,positioner
This time it had error 145 connection time out as dish did not move quickly enough. After it finished. I quickly executed again and this time it completed OK and zapped back to the 13 east channel.
Is it possible to add a confirm is on 28.2 service check before progressing to next step?
Last edited by abu baniaz; 30-07-13 at 22:17.
Version 201307281450 was tested. This went fine. However, this was a cursory one which went well. Not sure if the following would apply to it too.
Version 201307301500 was tested after removal of 20130301. Only hotbird list present. Tuner as motorised and other disabled. Executed whilst on a 13e channel.
It did not progress, it said dvbsnoop not found. This was the same with/without scriptcheck. It did however go to channel "999", but no picture.
Installed dvbsnoop and repeated. I encountered similar issue as Rob.
Re-enabled 28.2 input and executed whilst on 13e channel having transferred Vhannibal list and rebooted. Progressed and finished in 49 seconds. Hiccup, the activity window did not close. Not sure if Version 201307301500 self closes, but 20130301 does. After pressing OK plugin screen was shown and it zapped back to 13e channel by itself.
Executed via blue button whilst on 13e channel (28.2 tuner active at time of test). Corner popup came up, channel stayed on 13e. No progress. After 5 mins I restarted the receiver.
Next test:-
Switched to 28.2 channel and executed via blue button. Seems as it ran OK as log was generated and pop up window closed.
LraiZer (31-07-13)