Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 8 of 8

Thread: How to backup and restore your VU+ Duo2 LCD4Linux config

  1. #1
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts

    Thumbs up How to backup and restore your VU+ Duo2 LCD4Linux config

    How to backup your VU+ Duo2 LCD4Linux config.

    1) Menu > Setup > Plugins > Select LCD4Linux.
    2) Once you've accessed the plugin press Menu button on your remote.
    3) Select Save config to file and press ok.
    4) You will be prompted to give the file a name, I just use the default name that is prompted.
    5) The config file will then be saved to /tmp.
    6) Retrieve the config file using FTP.

    How to restore your VU+ Duo2 LCD4Linux config.

    1) FTP your config to /tmp.
    2) Menu > Setup > Plugins > Select LCD4Linux.
    3) Once you've accessed the plugin press Menu button on your remote.
    3) Select Load file and press ok.
    4) Exit out of all screens, your LCD screen should now be using the new config. If not change TV channel.


    L4L-CONFIG.jpg

    BTW: All settings can be done via the WEB-IF: http://boxip/lcd4linux/config
    Last edited by Rob van der Does; 09-08-13 at 05:16. Reason: Added WEB-IF
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  2. The Following 15 Users Say Thank You to Sicilian For This Useful Post:

    + Show/Hide list of the thanked

    aass5591 (07-11-13),Crypt1cElder (08-09-17),decodeit (18-01-16),djusteve (12-12-13),edinsorin (31-10-15),evesham (13-09-15),fahadkwi (15-01-14),gallims (15-03-15),henju (25-10-14),LeeC22 (06-07-15),redtangodancer (01-09-13),ukoberon (13-08-15),vmax (18-07-13)

  3. #2
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Added how to restore the config.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  4. The Following 2 Users Say Thank You to Sicilian For This Useful Post:

    aass5591 (07-11-13),Crypt1cElder (08-09-17)

  5. #3

    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2010
    Posts
    793
    Thanks
    360
    Thanked 216 Times in 134 Posts
    Quote Originally Posted by Sicilian View Post
    How to backup your VU+ Duo2 LCD4Linux config.

    1) Menu > Setup > Plugins > Select LCD4Linux.
    2) Once you've accessed the plugin press Menu button on your remote.
    3) Select Save config to file and press ok.
    4) You will be prompted to give the file a name, I just use the default name that is prompted.
    5) The config file will then be saved to /tmp.
    6) Retrieve the config file using FTP.

    How to restore your VU+ Duo2 LCD4Linux config.

    1) FTP your config to /tmp.
    2) Menu > Setup > Plugins > Select LCD4Linux.
    3) Once you've accessed the plugin press Menu button on your remote.
    3) Select Load file and press ok.
    4) Exit out of all screens, your LCD screen should now be using the new config. If not change TV channel.


    L4L-CONFIG.jpg

    BTW: All settings can be done via the WEB-IF: http://boxip/lcd4linux/config
    I have VIX 775 installed on my Duo2 and can no longer access the lcd config via WEB-IF as described above is anyone else experiencing this Thanks
    VU+Duo2 5.2.025

  6. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Quote Originally Posted by Alanp View Post
    I have VIX 775 installed on my Duo2 and can no longer access the lcd config via WEB-IF as described above is anyone else experiencing this Thanks
    Fine here on 776.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  7. The Following 2 Users Say Thank You to Sicilian For This Useful Post:

    aass5591 (07-11-13),Alanp (06-11-13)

  8. #5

    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2010
    Posts
    793
    Thanks
    360
    Thanked 216 Times in 134 Posts
    Thanks confirmed also working fine on 776
    VU+Duo2 5.2.025

  9. The Following 2 Users Say Thank You to Alanp For This Useful Post:

    aass5591 (07-11-13),Sicilian (06-11-13)

  10. #6

    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2010
    Posts
    793
    Thanks
    360
    Thanked 216 Times in 134 Posts
    Quote Originally Posted by Alanp View Post
    I have VIX 775 installed on my Duo2 and can no longer access the lcd config via WEB-IF as described above is anyone else experiencing this Thanks
    I have the same problem again with VIX Build 802, Also I can not load LCD config as described in post #1 Thanks
    VU+Duo2 5.2.025

  11. #7

    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi,

    Do you have a link to the LCD4Linux plug in as no plug ins show up anymore on my box and will need to transfer it using filezilla.

    Thanks.

    Quote Originally Posted by Sicilian View Post
    How to backup your VU+ Duo2 LCD4Linux config.

    1) Menu > Setup > Plugins > Select LCD4Linux.
    2) Once you've accessed the plugin press Menu button on your remote.
    3) Select Save config to file and press ok.
    4) You will be prompted to give the file a name, I just use the default name that is prompted.
    5) The config file will then be saved to /tmp.
    6) Retrieve the config file using FTP.

    How to restore your VU+ Duo2 LCD4Linux config.

    1) FTP your config to /tmp.
    2) Menu > Setup > Plugins > Select LCD4Linux.
    3) Once you've accessed the plugin press Menu button on your remote.
    3) Select Load file and press ok.
    4) Exit out of all screens, your LCD screen should now be using the new config. If not change TV channel.


    L4L-CONFIG.jpg

    BTW: All settings can be done via the WEB-IF: http://boxip/lcd4linux/config

  12. #8
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,244
    Thanks
    1,315
    Thanked 1,148 Times in 908 Posts
    @sillygilly - I've replied to on the other thread you created on this. The GB Quad Plus doesn't need LCD4 plugin to work with a ViX image.
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.