Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 3 123 LastLast
Results 1 to 15 of 42

Thread: SID PAT Issue

  1. #1
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts

    SID PAT Issue

    Any ideas folks on how I can fix an SID not found in PAT error...

  2. #2
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    This usually occurs when the frequency or transponder has changed for the channel in question, you need to either update your bouquet ( channel list ) manually or use one of the Automated bouquet creators such as the ABM plugin built into the ViX image.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  3. #3
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by pheonix View Post
    This usually occurs when the frequency or transponder has changed for the channel in question, you need to either update your bouquet ( channel list ) manually or use one of the Automated bouquet creators such as the ABM plugin built into the ViX image.
    Thanks Pheonix I tried to do a ABM scan but got [Cannot read data] therefore channel lists in EPG and Genre themselves mixed up combined with a lot of n<a's where Channels once were. Any ideas mate

  4. #4
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    what's your tuner setup ?.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  5. #5
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by pheonix View Post
    what's your tuner setup ?.
    Twin Tuner Uno set to 28.2e on fixed dish...is that what you mean mate?

  6. #6
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    so how exactly is the tuner setup in the tuner setup page and do both tuner inputs have their own feeds ?.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  7. #7
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by pheonix View Post
    so how exactly is the tuner setup in the tuner setup page and do both tuner inputs have their own feeds ?.
    In Tuner Config page it says Tuner A:Vuplus DVB-S NIM (AVL6222) (DVB-S2) Single Sats 28.2 Eutelsat 28A & Astra 1N/2A/2F and exactly the same for Tuner B Phoenix..

  8. #8
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    open each tuner up by pressing ok on them and make sure both are set to.

    simple
    single
    28.2 east
    no

    also can you confirm that both tuner inputs have their own feed from the LNB ?.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  9. #9
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by pheonix View Post
    open each tuner up by pressing ok on them and make sure both are set to.

    simple
    single
    28.2 east
    no
    also can you confirm that both tuner inputs have their own feed from the LNB ?.
    Yes they are both set up as you have written above mate...

  10. #10
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    tune to BBC1 and run ABM again to see if it makes a difference, if that still does not work try temporarily disabling tuner B then run ABM. Just trying to rule a few things out ( sorry i cant be much more help at present as i dont have one of these twin tuners with which to test, so i'm just guessing at the moment ).
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  11. #11
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Not at all mate I appreciate your time, will get back to you asap...

  12. #12
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    The ABM scan from BBC1 didn't work same error code [cannot read data]

  13. #13
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    Quote Originally Posted by davy28 View Post
    The ABM scan from BBC1 didn't work same error code [cannot read data]
    Try temporarily disabling tuner B and see what if any differing results you get.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  14. #14
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Hi mate disconnected Tuner B got Error code [Timeout for Tuner Lock] plus previous channels showing [SID not found in PAT]

  15. #15
    davy28's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    223
    Thanks
    1
    Thanked 5 Times in 4 Posts
    Hi Phoenix any more ideas or suggestions how to fix above problems...

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.