Do you know which channels are missing?
Have you enabled freesat and set region?
What are all the settings you have? This will help replicate your issue and lead to a fix if possible.
Do you know which channels are missing?
Have you enabled freesat and set region?
What are all the settings you have? This will help replicate your issue and lead to a fix if possible.
abu yes channels that were missing are stated in earlier thread, freesat has been enabled and region set, as stated earlier this only happened a few days ago when going through listings and found there were some missing
before that it was working great
the settings I have now (all working ) in a b m providers freesat - yes sky Scotland - yes sky uk - no , scan works fine when providers are set to this,
when sky uk is set to yes it doesn't read data , fixed dish
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
@DougieDuncan,
Many thanks for your post. However, to fix the issue the authors would need the "failed" settings so that they can replicate it.
where will I find the failed settings
Sorry if I was not clear, thete is no file etc. Please type exactly what the settings you used which do not work.
Someone can then set it up exactly as you did and hopefully encounter the same problem you did.
just to confirm all working on my box, just done a scan as i noticed a few were missing, i run a motorized and static usually have to switch the motor off while i do a uk & ireland scan and that works for me.
Sorry guys if this is hijacking the thread somewhat but where can I get AB from? I looked through the plugin's that are available for download but couldn't see it there, does it have to be downloaded onto a PC then installed via FTP? If so is it available at the site mentioned above?
you can get it here to install manually.
http://www.world-of-satellite.com/sh...t=autobouquets
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
abu the settings I had were in autobouquets maker providers, sky uk enabled, free sat enabled , sky Ireland, enabled, now had these settings on the box since I got it and ran great and had abm to update daily, as I say checked listings and noticed channels missing so went into abm and tried to scan , but it stated cannot read data, so as topbuzz another member said was to try and scan sky Scotland , so I disabled sky uk and enabled sky Scotland and put my region in and it scanned all channels , im afraid that's all the settings that I know