i can do image via modem ?
i can do image via modem ?
Hi abu baniaz,
When I do a factory reset using the option of holding the up button while powering on the box, I get a blank TV screen and the lcd display goes blank also and nothing appears to happen. I have also followed
the advise from bassethound and others and have tried other images to flash but I still get the 'ERROR Loading' notice when 100% is reached with a smaller notice saying something like 'incorrect file'. I have plenty of spare boxes but I just dont like trashing a box without a fight.
Could you try the image from this thread? The 500Super and 600 use the same images.
http://www.world-of-satellite.com/sh...ll=1#post57978
Finally thought I was getting somewhere but I am still in trouble. I managed to load a TM600 image to the box. Now when I power up I get the 'TM-600' with the 'Technomate' logo and that's it . If you remember from my other posts the box previously would start to boot up and display the GP logo and sit there. I did however manage to do a factory reset which I was unable to do in the past. I also tried to load the UR image to the box which I have used on the same model TM many times before but still get the message loading error and incorrect file. I am using the rs232 option for everything because lan etc are not functioning.
I take it you are selecting "Factory reset" instead of "Load Default Settings" in TCC
Sorry out of ideas. TM are normally good at helping out. If there are no other suggestions, Give them a buzz. 020 8884 0701.
If they give you a solution please post back just in case someone else has the same issue.
sounds like a bootloader issue. try info supplied here h**p://www.sat-universe.com/showthread.php?t=197860
Thanks fintannl,
I will follow your suggestion later. I think this box got a serious 'zapp' up the mains because when I first got my hands on it the bridge rectifier diodes were sc, so I suspect it may be more than just a simple sw issue. Coming from a background in bench repairs I find it hard to bin (trash bin) gear when a diode or capacitor will restore it to normal operation.
I will let you all know how it goes.