this is what is on my usb stick, is this correct for bootloader
update--tmtwin,tmtwinoe--cfe.bin
There should be a "cfe" folder in both the "tmtwin" and "tmtwinoe" folders. Inside the cfe folders there there should be a "cfe.bin"
If you downloaded the 07/11/12 boot loader, you should just copy the update folder onto the usb drive.
We provide technical support to all our customers when requested and do not lie to anyone, we've had no requests from any customer for TM-Twin support.
Your posts seem a little strange, firstly we DO NOT mis-sell to anyone by mis-advising them about Blindscan. If ANY customer ever ask's us if the TM-Twin supports Blindscan, we tell them no.
Another reason your posts look strange is that I do not recall us selling a single unit with the 4D image flashed to it, but who know's I may have forgotten an order.
I think you have us mistaken with another retailer: -
A) We DO NOT fob any customer's off, if there is an issue, we sort it out.
B) No one has visited or contacted us with a TM-Twin issue that you describe.
C) We do not recall any customer collecting or visiting us regards a TM-Twin, all our's have been sold online.
D) We DO NOT lie of mis-sell to anyone.
E) We have a 24 hours answer phone and had zero message regards anyone having TM-Twin issues.
F) No one has emailed or PM'd us regards any TM-Twin issues apart from some chancer today through ebay trying to get direct Technical support from us when their unit was not purchased from us.
Again, like we said above I do not recall selling a single TM-Twin with 4D image installed.
If you genuinely purchased from us please drop us A PM through the forum or email us here providing your order details http://www.world-of-satellite.co.uk/...mation/contact We do our utmost to help all our customers and keep them happy.
Last edited by world-of-satellite.co.uk; 07-01-13 at 00:49.
Official Distributor of Formuler products, GiGaBlue, Octagon,
Technomate, Tiviar, VU+, Xtrend and many more...Secure online ordering - Paypal and all major cards accepted - Order online 7 days a week!PRICE MATCH PROMISE - WE'LL TRY TO MATCH ANY UK PRICE**SEEN ANY PRODUCT CHEAPER? CONTACT US AND WE’LL TRY TO MATCH LIKE FOR LIKE!
abu baniaz (09-01-13),judge (07-01-13),Larry-G (06-01-13),Mr. Mister (07-01-13),scruff1963 (07-01-13)
------------------------------------------------------
1-Disconnect hard dsik / usb/Lnb cable.
2-Insert usb with any image to front usb /if still not downloading use rear usb.
If none above ,
Please contact world of satellite or Technomate direct help line on 0208 884 0259 to rectify your problems.
Last edited by Jony; 07-01-13 at 01:35.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
This guy is not genuine. Someone is trying to leave bad image about technomate. I have used technomate receivers for so many years and not even one problem. This guy should be banned for being a lier and time waster.
Hello,
I bought a TM-Twin-OE from the sponsor recently. The box had intermittent picture breakup and would freeze or reboot itself randomly (with no hard drive installed, immediately after flashing). I was passed on to Technomate directly for support and they shipped a replacement box, which works perfectly so far.
However, it was very frustrating while being asked to troubleshoot what was clearly a faulty box. WOS and TM were both amazed and skeptical that such a thing was even possible.
So I'd just like to say that no box is perfect, every device manufactured in high volumes has a return rate, and I have had first hand experience of a faulty TM-Twin-OE.
You have to also understand that the sponsor and technomate receive literally hundress of emails and calls daily from users reporting issues. This can often at times be a very labor intensive process to troubleshoot and diagnose and almost every one turns out to be user error is some way.
Now im not dismissing your claims but as you also discovered where there is a genuine problem it will be rectified. Thats more than I can say for a lot of other traders out there.
Sent from my GT-I9300 using Tapatalk 2
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
guys i do believe this thread was started by me for the issues I was having. It's been well and truly hijacked by the other guy. can i ask for some more assistance as ive updated the box several times, left crash logs and my box is still unreliable. it was purchased direct from technomate so unless i can get this box working reliably it's going back to them shortly. only piece of software on it that might be of issue is cccam so id like to rule that out. any more ideas?
I had a faulty gigablue quad where the front lcd panel was loose. they replaced the front panel with a brand new one and shipped it back the next day. I have nothing but praise for wos. and I wouldn't purchase from anywhere else
What image & build is your box using now?
are you still using a bus powered HDD?
I very much doubt it's cccam causing your issues, works perfectly well here on Twin & TM2T
hi judge that info is in the crash logs i posted. but i have an internal now, freshly flashed and and sw updated. Enigma crashes evry day, mainly when you come to use it in morning. Get's it's knickers in a twist and crashes. I'm going try a different image an if it plays up with that i'll give tm a bell see if they'll have it back n replace it. Ive looked at the crash logs myself to see if i can see a pattern. Seems to poll for a child process that has died but how it's coded to handle that i dont know. Never had a box this troublesome before and dont have much time to fuff around with them tbh. Ive got vix 2.3 running on my vuduo+ and its rock solid
Sending box back to TM....fuffing useless since I bought it before Xmas. Tried a software update on it this morning and it crashed. Piece of cr4p!