How do you add the lines to Vu+Duo?
I have installed some CCAM and NewCamd but I don't know how and where to add the lines
How do you add the lines to Vu+Duo?
I have installed some CCAM and NewCamd but I don't know how and where to add the lines
How to add the IP port user and pasword to the ccam I installed. In the eagle box if very easy to add it in the GUI but here I don't know
I ftp my box and I copy the ccams then I installed them from the box but how I add the IP, etc to it
No cardsharing talk please.
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
Hi....New to this....bare with me...
Trying to instal CC cam as described in this tutorial on my VU+ Ultimo
Followed all steps, correctly i think, up to .......
now go to your box and press Menu/Setup/System/VIX/Install Local Extension and you should have enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file in there
On my menu after i press Menu...Setup....System....I dont have an option for VIX???
Where have i gone wrong or am i following the wrong procedure for my box?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Hi....Thanks for the reply.....still no joy....
I still have no option for Vix or Blue button to select on arrival at setup menu
On the box menu I have the following to choose from after selecting setup:
Service Searching
System
Common Interface
Parental Control
Factory Reset
??? any ideas ???
are you sure your using a ViX image ?
menu> information> about. tell us what it says in there.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
your right....as soon as you told me that....i realized i had not downloaded the Vix image
I assumed it had been done already by my pal who was trial ing the box for me!
currently downloading the most up to date image
http://www.world-of-satellite.com/en...ultimo_usb.zip
and will flash the machine with this then try again
ill let you know how i get on......
cheers
Larry-G (28-10-12)
Hi.....Updated the most up to date vix image to my ultimo box and followed the tutorial exactly as it says
Finished all steps without problem
Got the ccam.2.2.1 active and pressed blue button
All seems to have worked........except i can only see free to air channels...bbc etc..all encrypted channels like sky 1 just go black screen?
The box shows that sky 1 is on and what is currently showing and how much has elapsed but just not on tv screen
Any ideas??
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Hi
I have now fixed it........There must have been a problem with my original CCam.cfg file
I re-wrote the cfg file and re put it in the ETC folder
Rebooted the Ultimo
And works a treat now
A note to all readers of this......the guide works perfect.....its only my own inability that made it difficult!
Thank you all for your expertise and quick replys
Most appreciated
C.H
hi followed this tutorial , but the CCcam file into the tmp folder etc, went to box into vix and the local extensions folder is empty any ideas?
Added easier download links for ViX softcams to 1st post.
http://www.world-of-satellite.com/en...=ViX-Softcams/
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
abu baniaz (16-11-12),Seventyseven (18-11-12)