i have tried 4 different images today that way and only one works bar from backup image. my box was pre installed with vix image so did not need to use bootloader.
i have tried 4 different images today that way and only one works bar from backup image. my box was pre installed with vix image so did not need to use bootloader.
Thanks a lot fs1. Will give this a go tomorrow. Don't have much patience left tonight...
I am fast running out of USB sticks and patience, either get nothing at all or a message that there are no displayable files on this medium found. My sticks work with Spider box and even flash openmips, but not bootloader or vix
Dreambox 800HD, Vu+ Duo, Vu+ Duo 2, VU SE- 1.2 Triax, Quad S*ydish
I have Openmips 2.0 kernel V3.1.1 GUI build 2012-10-05 on my HD800UE. It wont allow me to flash openvix 3. only one usb at a time, tried front and back, I power off with power button or by cutting the mains, but the box never sees the image to flash or bootloader. Using same usb stick formatted in fat32 that I flashed Openmips with because I could not get openvix to flash.
Last edited by wba; 05-10-12 at 21:53.
Dreambox 800HD, Vu+ Duo, Vu+ Duo 2, VU SE- 1.2 Triax, Quad S*ydish
wba have you tried these to files from 1st post? Readme file is also included in bootloader zip.
http://www.world-of-satellite.com/sh...-OE3-0-Release
fs1
Last edited by fs1; 05-10-12 at 22:29.
Yes but the same files for UE, never had the conf message yet
Dreambox 800HD, Vu+ Duo, Vu+ Duo 2, VU SE- 1.2 Triax, Quad S*ydish
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Had this issue with my UE. Front port didn't recognise image files but USB stick flashed. Moved it to rear port and worked first time.
Not tried with any other images, just Vix
Does not work on the back usb or the front and I dont get the yellow triangle in the display, I have just done a factory reset and still no joy. is their a telnet command that will force it to look at the usb stick and flash? How can I tell what bootloader I have in the box please?
Dreambox 800HD, Vu+ Duo, Vu+ Duo 2, VU SE- 1.2 Triax, Quad S*ydish
The SE version displays DONE on the front mate.
Gigablue se version is easy to update mate.
Bootloader takes seconds to load - image may take anything upto ten mins
ive flashed 2 of these boxes with several images
Backed up VIX image. In backup folder I have 'gigablue' folder with 2 files in and a 'bat' file outside of folder. Do use bat file and giga folder for backup or just folder?
Sent from my GT-I9100 using Tapatalk 2
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Ok ive spoke a bit too soon
Tryin to replace openmips with vix and nothing is happening.
Have flash the updated bootloader and then vix image in both front and back usb ports this same usb pen has been used on my duo n solo to put vix image on successfully. So why is come flashing giga it hits a brick wall.
Vu+ Duo
Vu+ Solo
Gigablue HD 800 SE
All with latest vix image - Autobouquets - SgtFlipflop 28.2e Picons - WebradioFS
Same here, I must be close to 100 attempts now. Even tried the HP format tool
Dreambox 800HD, Vu+ Duo, Vu+ Duo 2, VU SE- 1.2 Triax, Quad S*ydish