Further success today building an OpenPLi image using thier makefile.
All the info is here if anyone wants to have a go: -
Code:http://openpli.pli-images.org/wiki/OpenembeddedBuild
Further success today building an OpenPLi image using thier makefile.
All the info is here if anyone wants to have a go: -
Code:http://openpli.pli-images.org/wiki/OpenembeddedBuild
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
ok guys, im back on the seen now, sorry not been around lately, do you still need help sic ?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
you got any further Sic, ..??
Hi,
got mostly the same errors that you did, but I've got the three packages (curl, gawk and zip) so that's not where the fault is.
(as far as I know I don't have dependency problemes with openembedded or bitbake and everything is newly installed from git)
This is what happends with my build.
That was after running task 2090 of 2145.NOTE: Tasks Summary: Attempted 2090 tasks of which 0 didn't need to be rerun and 4 failed.
ERROR: '/stuff/build/dm750/openembedded/reciepes/tuxbox/tuxbox-libtuxtxt.bb' failed
ERROR: '/stuff/build/dm750/openembedded/reciepes/tuxbox/dvbsnoop.bb' failed
ERROR: '/stuff/build/dm750/openembedded/reciepes/tuxbox/tuxbox-common.bb' failed
ERROR: '/stuff/build/dm750/openembedded/reciepes/linux/linux-bm750_2.6.18.bb' failed
The 4 error files I can also find in the build maps so I think they got downloaded but might be with error?
the file "log.do_install.28451" in directory :
/stuff/build/dm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.4.3-ro0.1/tmp/
Ends with the following lines.
As you can see, almost the same as your error (minus one m: cannon stat.... line)make[3]: Entering directory `/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.4.3-r0.1/gcc-4.4.3/build.i686-linux.mipsel-oe-linux/mipsel-oe-linux/libiberty/testsuite'
make[3]: Nothing to be done for `install'.
make[3]: Leaving directory `/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.4.3-r0.1/gcc-4.4.3/build.i686-linux.mipsel-oe-linux/mipsel-oe-linux/libiberty/testsuite'
make[2]: Leaving directory `/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.4.3-r0.1/gcc-4.4.3/build.i686-linux.mipsel-oe-linux/mipsel-oe-linux/libiberty'
make[1]: Leaving directory `/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.4.3-r0.1/gcc-4.4.3/build.i686-linux.mipsel-oe-linux'
mv: cannot stat `/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.4.3-r0.1/image/stuff/build/bm750/build/tmp/cross/mipsel/*//lib/libg2c.so*': No such file or directory
mv: cannot stat `/stuff/bild/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.1.1-r1.1/image/stuff/bild/bm750/build/tmp/cross/mipsel/*//lib/libgfortran*.so*': No such file or directory
mipsel-oe-linux-strip: '/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.1.1-r1.1/image/usr/lib/libg2c.so.*': No such file
mipsel-oe-linux-strip: '/stuff/build/bm750/build/tmp/work/mipsel-oe-linux/gcc-cross-4.1.1-r1.1/image/usr/lib/libgfortran*.so*': No such file
So, reading what did fix it for you I guess the problems is that the build file on some stage fails to download the needed files?
How can I verify that the build script has downloaded every package that it needs?
Or how to I re-run the "make -f Makefile-vuplus-5.1 image" whitout needing to do the first successfull 2090 tasks?
Thank you for any help on this matter.