New VIX Image Technomate TM-TWIN-OE
30/09/2012 - OpenViX 3.0.338
From VIX Team
TM - Kernel Version: 3.5.3
TM - Drivers: 26-09-2012
All Users
Latest bootloader is required to be flashed prior to flashing the image
Bootloader instructions are at the bottom of this page
Features
VIX EPG
Graphics and Text mode available.
Video Playback
All EPG screens now available while watching a recording, for easy switching back to Live TV or setting timers.
Channel Selection
Support added to change font sizes and number of rows.
Support added to have a 3rd event showing (Skin Dependent)
Support added to display start time and end time for all events shown.
EPG Selection
Added help screen to all epg selection screens.
Added support to change font sizes and number of rows.
Language Selection
Added English (UK) to available languages.
Translations
Added support for English (UK).
Sorting
You may now sort Menus, Settings and Plugin Browser alphabetically.
Network Browser
Uses less memory during Scan.
Moved to new Setup Mounts screen.
Openwebif
New style webif now accessed using default port 80
Old style webif still available if required for use with certain PC signal meters
About Screen
Added network info.
Plugins
As part of streamlining the image, removed NFS, AFP, Samba, OpenVPN, Inadyn, MiniDLNA & uShare from default image (can now be installed/de-installed through Network setup screen)
On Screen Hints
Now available as options are selected.
Instant Record
Instant record & Zap added to all EPG screens including EPG search. (short & long press record button)
Enhanced Movie List Features
It is now optional to play next movie, when the a movie reaches end, setup in menu of movie selection screen.
Latest Drivers (26/9/2012).
Loads of under the hood changes made for a smoother user experience.
Button Mappings
Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red ** & *** - Sort single EPG info when in channel list.
Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - Instant IMDB Database search on the current programme.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.
** Can be changed in ViX Menu
*** Can be turned off in ViX Menu
Special Thanks
- rytec - for his continued support.
- Ocram for his Picon sets
- All developers for their plugins used in the feeds of this image.
- All of the ViX Beta team for their hours of testing and dedication on getting this image working.
- Rob van der Does, belierzz, rimas, Henkka, raivo, eesatfan, Zartmy, Trial & june8 for their translation work
- Huevos for his work on blindscan
- Gennart1 for dvb-as102 support
- Markus625 for skin ViXBMC
Note: Not all 3rd party plugins have been tested or are guaranteed to be compatible.
Requests
If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian
Known issues: -
- USB Tuners not currently supported.
- OpenWebif screenshots not functioning 100%.
- Please be aware that using the front power button on the TM-Twin was designed with the original factory firmware in mind and not Enigma 2 images. It will not place the receiver into standby, but shut the receiver down in the same was as the rear power switch, This is set in the hardware and not a image thing so we have no control over this function. DO NOT press the front power button while flashing images or bootloaders.
All Users
Latest bootloader is required to be flashed prior to flashing the image
DISCLAIMER
This procedure is done ENTIRELY AT YOUR OWN RISK
The VIX team take no responsibility for any failure of your box due to following these instructions
Bootloader instructions - Follow very carefully and DO NOT POWER OFF or remove USB stick for any reason during this process
YOU HAVE BEEN WARNED.
INSTRUCTIONS
REMOVE ALL USB DEVICES FROM THE RECIEVER BEFORE YOU START
USB sticks of 4GB or less are recommended
Please be aware that using the front power button on the TM-Twin was designed with the original factory firmware in mind and not Enigma 2 images. It will not place the receiver into standby, but shut the receiver down in the same was as the rear power switch, This is set in the hardware and not a image thing so we have no control over this function.
DO NOT PRESS THE FRONT POWER BUTTON WHILE FLASHING IMAGES OR BOOTLOADERS!
1) Format USB stick Fat32. If you already have a FAT32 stick you MUST have no other files and folders on it.
2) Create folders > update > tmtwin > cfe > copy bootloader across and rename to cfe.bin or copy the whole update folder from the Bootloader.zip to the root of your USB stick, double check the structure is \update\tmtwin\cfe\cfe.bin
3) When powering on for first time after flashing with bootloader and image you MUST REPEATEDLY PRESS EXIT until the image boot logo appears after the initial splash screen.
IMPORTANT - BEGIN PRESSING EXIT BEFORE AND DURING POWERING BACK ON - IMPORTANT
3a) Connect USB stick with bootloader to the front USB socket and power on, message will appear on screen - press OK to flash Bootloader
3b) When finished message appears on TV Power off using rear power switch
3c) Wait with power off for a good 90 seconds minimum before powering back on.
When powering on for first time after flashing with bootloader and image you MUST REPEATEDLY PRESS EXIT until the image boot logo appears after the initial splash screen.
On NEW VIRGIN receivers that have never been flashed with an Enigma 2 image or required bootloader, you MUST repeatedly press menu for a few seconds after the Linux penguin splash screen appears, you will not see an image boot logo.
IMPORTANT - BEGIN PRESSING EXIT BEFORE AND DURING POWERING BACK ON - IMPORTANT
4) REPEAT THE WHOLE OF STEP 3 this will ensure that the flash is correctly partitioned.
5) Power off using the rear switch
6) Delete any files from your USB stick and transfer the image Update folder from inside the Image zip to the root of the stick.
7) With power off connect USB stick with Image to front USB and power on.
7a) Press OK for image to flash when message appears on TV or VFD Image will then flash.
7b) Power off with rear switch when completed message appears on TV or VFD
7c) Wait with power off for a good 90 seconds minimum before powering back on.
Downloads
Latest Bootloader 10/9/2012
Release 3.0.338 attached below
Download site for Latest Open Vix Builds HERE