Every time I try the Sweden EPG, it downloads the events and halfway through 'parsing events', the VU+ Duo freezes and reboots.
Every time I try the Sweden EPG, it downloads the events and halfway through 'parsing events', the VU+ Duo freezes and reboots.
is this going to USB or "flash" if its going to "flash" dependant on what other epg,s you are using, its likely that your system is over loading, hence the crash
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
How can I tell?
It's just done it on Germany too, it was fine for JSC.
It's saved to the HDD
well, I always save to a usb stick, ( no spin up time needed ) not sure about the consiquence,s of saving epg to HD, perhaps others might soon add to the thread,
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Thanks, JSC worked fine and so does Open TV for Sky UK.
Is there any more help on this?
JSC and Open TV still work, but Germany/France etc always freeze and reboot the box midway through parsing the events on the channel list.
anyone?
I would try disabling xmltv importer, then using opentv and rytec through XEPGDB sources. Works a lot faster.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Try adding a swap file & report back if you still have the same issues.
Would the swap file log the errors?
I'll try that today sicilian