Xtrend ET-5000 with bootloader 2.6.31

[silverfox0786]

yr framebuffer is not being loaded and hence yr getting segfault

you need to look into that to find a solution

[corrisi]

yr framebuffer is not being loaded and hence yr getting segfault

you need to look into that to find a solution

Hi,

Thanks for your replay! Probably is better sent te receiver to a official supporter because i think i don´t have enough knowledge to solve this problem.

Best regards

[corrisi]

yr framebuffer is not being loaded and hence yr getting segfault

you need to look into that to find a solution

Hi,

With putty or other software and null modem cable is not possible flash or sent any firmware to the receiver?

Best regards

[silverfox0786]

Hi,

Thanks for your replay! Probably is better sent te receiver to a official supporter because i think i don´t have enough knowledge to solve this problem.

Best regards

i would say yes send it off for repair if your not sure

Hi,

With putty or other software and null modem cable is not possible flash or sent any firmware to the receiver?

Best regards

Xtrend does not have null modem NFI flashing

[corrisi]

i would say yes send it off for repair if your not sure



Xtrend does not have null modem NFI flashing

Hi again,

Many thanks for your help. I will sent tomorrow the receiver for repair. I received today the response from seller and the warranty will be activated.

Best regards

[silverfox0786]

glad yr seller is happy to do a waranty repair

hope it gets sorted soon

[Prioryman]

Guy´s today I tried to update mates ET5000 and I´m having same problem, however when I type in init4 and then enigma2 I get:

Welcome to ViX for et5x00
ViX v2.3
et5x00 login: root
root@et5x00:~# init 4
root@et5x00:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
/dev/fb0: No such file or directory
+ (9) GFBDC
/dev/fb0: No such file or directory
framebuffer not available.
FATAL: no framebuffer available
Segmentation fault

Can anyone help as worried I have "bricked" his box. I can access the box both with putty and cuteTP. Been at it since 1pm today.... No hair left to pull.

Thanks

John

[twol]

Hi,

At this moment i have this problem. I restarted the receiver and always appear the message " BOOTLOADER LINUX 2.6.31.UBIFS BOOTING .....". After some minutes the screen is green. I tried everything, flashing the receiver with several images, but i can´t solve this problem.

This happened after disconnecting all cables from the receiver to change the location of receiver in my room. After that always BOOTLOADER LINUX 2.6.31.UBIFS BOOTING ....."

Anyone could help me, please!!!!!!

Best regards

have you done this... put the ET5000 folder in the root of a USB stick, put the stick in any of the USB ports then hold the up arrow on the front of the receiver and the new firmware will start flashing

[jani_sat]

Guy´s today I tried to update mates ET5000 and I´m having same problem, however when I type in init4 and then enigma2 I get:

Welcome to ViX for et5x00
ViX v2.3
et5x00 login: root
root@et5x00:~# init 4
root@et5x00:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
/dev/fb0: No such file or directory
+ (9) GFBDC
/dev/fb0: No such file or directory
framebuffer not available.
FATAL: no framebuffer available
Segmentation fault

Can anyone help as worried I have "bricked" his box. I can access the box both with putty and cuteTP. Been at it since 1pm today.... No hair left to pull.

Thanks

John

And I have the same problem. I tried 30 images but the screen remains green. Is dead?
Thanks

[rossi2000]

the problem is here:-
ViX v2.3

please flash the latest apollo build 95.

[Larry-G]

As rossi said ViX 2.3 is something like three years old, no longer has any feeds nor a build GIT. if you want to use a newer image you need to reflash the receiver with a USB stick it can not be done online.

[jani_sat]

Please explain me better. I tried and ViX-2.3.GM-et5x00_usb, but the same problem.
Thanks

[rossi2000]

go to openvix.co.uk and download the latest Apollo image from there.

[jani_sat]

Nothing and with this image. Not exist any tool for RS232 cable to upload this image?

[prodge]

go to openvix.co.uk and download the latest Apollo image from there.

Thankkkk U rossi I love you.

FIXED with latest apolo vix image in my case I have ET4000 with three lights no booting enigma2 problem only xtrend logo on tv
with crashlog no framebuffer available I have test all ET4000 images openpli,openatv, factory original image also bootloaders but simple fixed with this apolo vix openvix-Apollo.166-et4x00_usb

I am very very happy you save 100 euros to me.
You make my day.