ok,...and motor set up,.../ USALs?? can you view BBC WORLD on 1 west?? ( .08 west )
ok,...and motor set up,.../ USALs?? can you view BBC WORLD on 1 west?? ( .08 west )
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
i have tuner b as 28.2 and a usals but dont know how to get to thor 1 west to check i think dish is there as i read the dummys guide and i heard the dish move when i followed the instructions
just for now,...go blue button...(brings up channel list "fraverites" ) first set bbc uk, and confirm as working ( to yourself ) the select blue button again, select 13 east,....within the listings are free to air channels, select RIA 1 ( italian ) and see if it clears
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
i am pressing blue but it is not giving me the favorites it is giving me the option to chose an extension
sorry...exit out...then press the down button...then blue button...
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
i did that and it went to rai but the picture froze on me is that what is meant to do and you have been great help mate thank you
thanks...no need....but ria..if it froze, it means your dish has either over shot, or under shot 13 east....go to tuner setup, and adjust your east/west setting
where are you ( approx ) ?
if your east / west setting is say,...002.850 west change it to 001.850 west....go to sat finder, select 28 east, check the sig leval, then re select 13 east
then check sig leval again, if you get sigs going up down as it passes 23 east 19 east then 16 east...then 13 east, and a no sig..it means your dish alignment is out
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
i am close to Birmingham and have put in lat an long from dishpointer.com in but without the minus as i did not know how to do it
- = west + = east,...you need the west setting so at a guess....
002.00 west 051.000 north should be your approx start point
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
it is 052.5 north and 002.08 west
ok put in those settings to start with, then adjust the west setting by a degree +/- 1 degreeuntill you get 28/13 east this is not ideal, but its a start point
you do have a lot to do, to get the full benifits of this unit, but trust me..its awesome
I have to cut out now...got work in the morning. others will cont to assist,
once the basic setup is sorted,...we need to go jedi, but within the rules
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
i have used my spider box to bring the dish to 13 west and have done both tuners as simple and single one for 13 and for 28.It will have to do for the moment now need to load my softcam
this will get you softcams, suspect you need CCcamHTML Code:http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html
config file goes to ETC
cam goes to TEMP,...then blue button,....VIX...install local ext
really need to go...but good luck, chat on the forum tomorrow?
others will assist if needs be..but as said..you need to do some serious reading
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
many thanks mate andyou have been great.will do the reading as i have a week of work to get used to it.
Why buy a box like this went you have no clue how to FTP do some reading before buying boxes of this sort I no we all have to start somewhere but a bit of reading and researching helps