Hi All
I've recently upgraded from a DM7000 to a Vu+ Duo and need to use a Phoenix reader on the rs232 port. Card works at 6MHz.

Using the same working oscam configuration as before, the card does not initialize properly.

I had to change the device location to

device = /dev/ttyS0

to get the port recognised.

Is this port enabled for a card reader in the Vu+? Do I need any additional drivers?
I've done a search but found no answers.

The internal slot does not appear to work at 6MHz either.

[BTW There is a similar problem with the DM7025 - the serial port does not work for a card reader.]


TIA
007.4