Hi.
I upgraded my OpenVix to 6.2.011 last week and since then I've once again got the problem where it will only allow me to record two channels at the same time. Trying to add more results in a message pop up saying there is no available tuner.
This was all working fine before I upgraded. I could happily record 4 or more channels whilst watching another. My tuner list is below:
Tuner A
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner B
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner C
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner D
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner E
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner F
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner G
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner H
Vuplus DVB-S NIM(45308X FBC) (DVB-S2X)
Tuner I
Vuplus DVB-T NIM(BCM3466) (MultiType DVB-C/T2)
Tuner J
Vuplus DVB-T NIM(BCM3466) (MultiType DVB-C/T2)
Tuner A and B are set to simple mode each with its own LNB. I note Tuner C now says its set to FBC Automatic connected to Tuner A, which I think has changed since the upgrade. I've attached a screenshot of the tuner screen.
I tried a full re-tune, but that didn't help. Any ideas what could be wrong please?
Thanks
IMG_20221129_215624.jpg