Hi,
For about a month i have been having issues with a lot of Freesat channels. The channels i'm having trouble with are pretty much every channel except the BBCs.
The channels can work fine and then i get a tune failed with 0% SNR & 0% AGC and they may not come back for hours or minutes. Sometimes when watching a non BBC channel it can be glitchy and if i check the SNR and AGC for the channel i get 0% SNR and AGC one second and the next 100% SNR and 86% AGC.
on the BBC channels i get 100% SNR and about 86% AGC all the time.
what i have tried so far:
tightened all the bolts on the sat.
i tried a scan with ABM but get the error "cannot read data"
Did a re-flash with newest version of openvix at the time
in signal finder i get 100% SNR and 86% AGC when the channels are clearing and nothing when the channels are not.
this is happening on a VU Solo2 with openvix 5.1 027
another VU Solo2 i look after is also having the same problem the owner is telling me, that is running openvix 5.0
Both sats are standard sky dishes
anyone have any suggestions/advice
Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
