Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 15 of 19

Thread: Help! Channel keeps suddenly changing to random station!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 22-03-15, 17:00 #1
    ninjakettle
    ninjakettle is offline
    Title
    Junior Member
    Join Date
    Mar 2015
    Posts
    10
    Thanks
    8
    Thanked 1 Time in 1 Post

    Help! Channel keeps suddenly changing to random station!

    I have an issue where every now and then - the receiver will change channel. It seems to be a random channel each time often in a different bouqet.
    I have reflashed the image and tried the newest images too - same problem.

    From a fresh install, with no plugins, no skins etc - it happens.
    I enabled Debugging and cleared the log after a reboot to see what happens.
    I get an output (below) but don't see anything that might be causing this. Could it be a hardware issue?

    I'm currently running OpenVIX 153, Apollo.


    Code:
    playing 1:0:1:D355:81C:2:11A0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:5208:812:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:5208:812:2:11A0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x200f350
[eEPGCache] remove channel 0x200f350
[EPGC] abort caching events !!
allocate channel.. 081c:0002
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12551500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1951 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:D355:81C:2:11A0000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1d, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x200f350 running
[eEPGCache] channel 0x200f350 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
RemovePopup, id = ZapError
[SEC] sleep 500ms
PATready
use pmtpid 0104 for service_id d355
[Dish] tuning failed
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (0903), and 1 audio stream(s) (0904), and the pcr pid is 0903, and the text pid is 0905
allocate demux
decoder state: play, vpid=2307, apid=2308
DMX_SET_PES_FILTER(0x903) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x904) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x903) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x905) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
[eDVBCAService] new service 1:0:1:D355:81C:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:D355:81C:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
[EPGC] start caching events(1427039695)
sdt update done!
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 15:54:58
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] schedule other finished(1427039703)
KEY: 352 OK
action ->  InfobarShowHideActions toggleShow
KEY: 352 OK
KEY: 352 OK
action ->  InfobarShowHideActions toggleShow
KEY: 352 OK
KEY: 174 EXIT
action ->  InfobarShowHideActions hide
KEY: 174 EXIT
playing 1:0:1:CFEE:909:2:11A0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:D355:81C:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:1:D355:81C:2:11A0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x200f350
[eEPGCache] remove channel 0x200f350
[EPGC] abort caching events !!
allocate channel.. 0909:0002
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11344500 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1594 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:CFEE:909:2:11A0000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 0
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 19, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x200f350 running
[eEPGCache] channel 0x200f350 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
RemovePopup, id = ZapError
PATready
use pmtpid 0104 for service_id cfee
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (092c), and 1 audio stream(s) (092d), and the pcr pid is 092c, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=2348, apid=2349
DMX_SET_PES_FILTER(0x92c) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x92d) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x92c) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
[eDVBCAService] new service 1:0:1:CFEE:909:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:CFEE:909:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
[Dish] tuning failed
VIDEO_GET_EVENT - ok
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[EPGC] start caching events(1427039756)
sdt update done!
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] schedule other finished(1427039763)
Unhandled Error
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/twisted/protocols/basic.py", line 571, in dataReceived
    why = self.lineReceived(line)
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1655, in lineReceived
    self.allContentReceived()
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1730, in allContentReceived
    req.requestReceived(command, path, version)
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 826, in requestReceived
    self.process()
--- <exception caught here> ---
  File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 189, in process
    self.render(resrc)
  File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 238, in render
    body = resrc.render(self)
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/base.py", line 103, in render
    
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/mobile.py", line 102, in P_eventview
    
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/models/services.py", line 474, in getEvent
    
exceptions.TypeError: unsupported operand type(s) for +: 'NoneType' and 'NoneType'
Unhandled Error
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/twisted/protocols/basic.py", line 571, in dataReceived
    why = self.lineReceived(line)
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1655, in lineReceived
    self.allContentReceived()
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1730, in allContentReceived
    req.requestReceived(command, path, version)
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 826, in requestReceived
    self.process()
--- <exception caught here> ---
  File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 189, in process
    self.render(resrc)
  File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 238, in render
    body = resrc.render(self)
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/base.py", line 103, in render
    
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/mobile.py", line 102, in P_eventview
    
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/models/services.py", line 474, in getEvent
    
exceptions.TypeError: unsupported operand type(s) for +: 'NoneType' and 'NoneType'
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
Unhandled Error
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/twisted/protocols/basic.py", line 571, in dataReceived
    why = self.lineReceived(line)
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1655, in lineReceived
    self.allContentReceived()
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1730, in allContentReceived
    req.requestReceived(command, path, version)
  File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 826, in requestReceived
    self.process()
--- <exception caught here> ---
  File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 189, in process
    self.render(resrc)
  File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 238, in render
    body = resrc.render(self)
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/base.py", line 103, in render
    
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/mobile.py", line 102, in P_eventview
    
  File "/home/vix2/oe-alliance/builds/openvix/dags4/tmp/work/tmnano3t-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+88e742466a-r0/git/plugin/controllers/models/services.py", line 474, in getEvent
    
exceptions.TypeError: unsupported operand type(s) for +: 'NoneType' and 'NoneType'
    Last edited by ninjakettle; 22-03-15 at 17:05.
    Reply With Quote Reply With Quote
  2. Sponsored by World-of-Satellite.co.uk
« TM-3T-Guide | Need help urgently? »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     

Options

About

Welcome to Satellite Support Forum .: Home of OpenViX Team:.!

World-of-Satellite enthusiasts Satellite, IPTV, Technology, Audio visual Forum.

Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility. Viewing Pay TV without a valid subscription is illegal. !! World-of-Satellite.com cannot be held responsible for the content of any information stored or posted on this forum.

Site Links

Social Media