I have a VU + Uno with W-LAN USB Stick Vu + wireless 150Mbps Wireless Adapter 2.4 GHz (chipset,: Ralink RT3070).
I can only manually configure WLAN, LAN is forced to connect to the box, then I do I replace the following files:
1. interfaces with the following content
Code:# automatically generated by enigma 2 # do NOT change manually! auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.2.100 netmask 255.255.255.0 gateway 192.168.2.1 pre-up /usr/sbin/wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B -dd -Dwext post-down wpa_cli terminate iface eth0 inet dhcp
2. wpa_supplicant.conf
Code:#WPA Supplicant Configuration by enigma2 ctrl_interface=/var/run/wpa_supplicant eapol_version=1 fast_reauth=1 ap_scan=1 network={ ssid="WLAN-12345678910" is changed scan_ssid=0 key_mgmt=WPA-PSK proto=WPA RSN pairwise=CCMP TKIP group=CCMP TKIP psk="12345678910" is changed }
Then I give the telnet command:
Code:ifup wlan0
Then I reboot my box, then I have wireless reception and everything is fine.
But when I restart my Uno must go down or I'm not after you receive your wireless more.
I do not advise more unfortunately, what I could do or why.
Thank you for your help
Akki