cactikid (26-01-23)
[QUOTE=adsk;530661...then would rule it out as a cause of the lan port locking up?[/QUOTE]Yes. It would rule it out as a direct cause.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
So I've now tested the box with wifi and it has these same errors but, as stated previously, runs without locking up. I can access the EPG successfully on the client box (in both wired and wireless modes) and if I understand the next few lines of code that follow the error, the box tries another method of downloading the epg which evidently works successfully.
For a bit of history, I've been using Client Mode via a wired ethernet connection for about 3 years. Initially I used a Edision OS Mega and the Viper V40 replaced this. In another room, I've got a Viper 4K51 also connected by wired ethernet. I've never experienced this freezing that I'm getting through the wired ethernet of the V40 with the other 2 boxes.
That's the reason for my suggestion that it might be a hardware fault. I suppose a driver issue could be to blame but wouldn't that show up in the logs somewhere?
@adsk
You did not respond to why you are not able to fetch the EPG.< 34.2554> 17:51:19.1222 [ChannelsImporter][checkEPG] Force EPG save on remote receiver...
< 34.2556> 17:51:19.1224 [ChannelsImporter][saveEPGonRemoteReceiver] URL: http://192.168.200.23/api/saveepg
< 34.3158> 17:51:19.1826 [ChannelsImporter][saveEPGonRemoteReceiver] ERROR: HTTP Error 401: Unauthorized
Where is epg been saved to ?
cactikid (28-01-23)
The epg error message occurs regardless of which interface is used and the epg works regardless of which interface is used.
We still seem to be no closer to working out why the ethernet interface on the box freezes the box in client mode but the wireless interface does not.