Hi Folks
Hoping someone here can help
The Network Card in the Gigablue unit seems to have stopped working. I have no idea when this happened.
Let me explain briefly. I went to update the box on Monday - scan for new Stations and the like. Whilst there I thought I'd check for software updates from TeamBlue. It was then I found out that the Network card wasn't working. I thought I might have configured the Network card for a fixed IP address on a different network so I switched over to DHCP, and no address was picked up. So I figured I would set a fixed IP in the correct Subnet with the correct gateway etc. (I work in IT so I know about subnets, gateways, DNS etc.). This also did not work. So today I powered the box off for a half hour and re-flashed it. I tried TeamBlue, OpenVix and OpenPLi. None of those have resolved the issue.
So my questions are:
- Anyone know of a way to reawaken the network card
- If not, are there any known USB Network dongles that might work (I appreciate there may be a need to load a module as this is Linux)?
- Would I be able to stick in one of those USB Wireless Antennas and make that work?
- Any other possible solutions that anyone can think of?
Hoping that someone out there has experienced this and found a fix or knows a way to resolve this?
Thanks in Advance!