Unless you change your bracket to a set of T & K brackets, you are on a mission. It is very difficult to get the bracket you are using exactly plumb. There is no adjustment!
Never tell a mod to stop trolling as i would edit your post before something bad happens,your choice.
abu baniaz (25-11-20)
For a motorised satellite dish to correctly find signal across the arc, it has to be plumb. Picture of your dish from other forum attached here for benefit of other peeople trying to help you.
chris0147_dish.jpg
Have a look at these threads
https://www.world-of-satellite.com/s...talltion-Guide
https://www.world-of-satellite.com/s...eive-Thor-0-8W
https://www.world-of-satellite.com/s...motorised-dish
https://www.world-of-satellite.com/s...-angle-problem
Thanks abu - I didn't know how you could tell what motor mounting system he was using from the photos he supplied!
@chris0147 - it's next to impossible to set up a motorised system on a bracket like that. The motor must be absolutely vertical (plumb) in order to track the arc properly. T & K brackets allow you to finely adjust the pole that the motor is mounted on so that the pole is vertical.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
The first windy day it will blow over anyway
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
I can't change it because the bracket I got is galvanized as it wont be rusts. These T & K brackets will get rusts so it is no good for me. If you want me to change it then you should pay me.
I can't see what it make any difference when change brackets as both works the same way. The bracket I got is vertical so what it make it any different!!!!
Surprisingly, you can get galvanised T & K brackets.
abu baniaz (22-02-22)
For some days I have been having serious problems with the channels, they get out of order and stop working