Hello Guys,
Flashed openpli on another slot which I did and now when I got to multiboot image selector can't seem to get openvix back, however I did USB back up before flashing how do I get around getting that back?
Hello Guys,
Flashed openpli on another slot which I did and now when I got to multiboot image selector can't seem to get openvix back, however I did USB back up before flashing how do I get around getting that back?
An image backup or settings backup?however I did USB back up before flashing
What is the problem with MultibootImageSelector?
A. Vix is not listed
B. When you select Vix, it does not restart into Vix
Image backup,
I had originally Vix and tried putting openpli on another slot
Once the openpli flashed onto another slot and pressed the power to go to multiboot selector there's nothing there.
I need Vix back.
could you please help me.
I looked at openpli and this is a vix board but there are 2 zips one says multiboot and other just shows image? What did you use? And with open vix you can get an option under multiboot to flash online!! A bit more detail needed. You may have to start again. And there may be a menu item with openli to select flash partition.
And I found this nugget.
If you want to try OpenPli or OpenATV then as per normal for online flashing ...
Blue Button /VIX/ ImageManager/ Download(yellow button) —-> choose OpenPli/OpenATV in download feeds -> select your image, then download
Once downloaded, select in list and hit flash(blue) button -> once flashed will reboot to new image
From either image long press power Button to get multibboot restart menu
Last edited by bmitie; 23-09-20 at 18:50. Reason: add a bit
Last questions (hopefully):
Ddid you flash OpenPLI using USB or Vix's Image manager?
Did you flash PLI's Multiboot image or USB image?
I flashed it through vix > image > then got openpli from there. but it showed me the option to put on to another slot before it flashed.
Flashed through Vix's image manager.
try this in case you missed it
If you want to try OpenPli or OpenATV then as per normal for online flashing ...
Blue Button /VIX/ ImageManager/ Download(yellow button) —-> choose OpenPli/OpenATV in download feeds -> select your image, then download
Once downloaded, select in list and hit flash(blue) button -> once flashed will reboot to new image
From either image long press power Button to get multibboot restart menu
Info:
If you flashed by Image Manager, default is to create a settings backup too. So once you flash Vix, you can restore settings quickly.
There were boot/recovery sector changes.
Action:
Flash either PLI USB image or Vix Recovery image version using USB. This will wipe everything on flash memory.
https://www.openvix.co.uk/index.php/...ges/zgemma-h7/
After that Multiboot Image Selector will allow you to select different images.
Once you flash Vix, you can restore your settings and plugins.
I was giving you best option to avoid issues in future.
As you can't do that:
Option 1.
Copy/put the zipped image that you created on the root of storage device mounted as HDD or in a folder called "images". PLI will be able to flash it back using the GUI.
Option 2
Flash stock image image using command line.
Code:wget --no-check-certificate -O install_vix.sh https://www.dropbox.com/s/hc2cdr116lvx3dj/install_vix.sh?dl=1 && bash install_vix.sh
imzy82 (23-09-20)