I am trying to update from Helios 16 to the latest version. I have tried to flash from usb and all seemed to go ok, but its still on Helios.
Do I have to do anything special to update from such an old image or should I keep trying?
Thanks.
I am trying to update from Helios 16 to the latest version. I have tried to flash from usb and all seemed to go ok, but its still on Helios.
Do I have to do anything special to update from such an old image or should I keep trying?
Thanks.
Cant even remember that name but would think it would need to be setup from scratch.
Recheck your usb is formatted to fat32 first and extract image to usb max size 8gb.
No other usb devices plugged in and usb inserted into rear when powered off.
Check the flashing guide for starting the flashing process.
Bad usbs box wont take the image and leaves old image on box.
Cruzer,Integral,Kingston 8gb all work for me.
fatbob46 (20-06-20)
You could try using Image Manager. Blue button > ViX > Image Manager.
* You will need to FTP the image over from your PC to your Receiver to be able to use Image Manager. The image needs to be zipped when you transfer it over.
* Also is your Solo2 genuine?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Thanks, I unplugged the rear usb and the hard drive first, and the display saw the update and appeared to flash it.
Maybe I should restore to factory first then try again.
I am doing the update because when I try to access the hard drive the box crashes.
It also says the box is not connected to the internet if I try an online update although a network check reads ok and I can cotrol the box from my computer.
Edit/ yes genuine box from w.o.s
Read Post #3, that is your better method to flash your receiver, if it is genuine.
Sent from my iPhone using Tapatalk
Last edited by Andy_Hazza; 20-06-20 at 14:05.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
fatbob46 (20-06-20)
Thanks, I'll try that.
Thanks! that worked pefectly.
Andy_Hazza (20-06-20),cactikid (20-06-20)