In fact this skin had already been presented here:
https://www.world-of-satellite.com/s...U5PVR-HD/page2
maybe it's changed a bit now?
I think it is a problem with this new transalpine beam. Struggling with it on Vu Ultimo 4K too.
Last edited by Huevos; 05-02-20 at 19:08.
Willo3092 (05-02-20)
@huevos, my skin, is updated to not use the old messagebox code with pixmap, infopixmap, ErrorPixmap, QuestionPixmap, just use "icon" lansav code and that you do not have updated in the skins, I tell you this because you are going to try My skin and errors in this type of screens (messagebox). only use MultiPixmap "icon"..may have errors I don't know!!!
skin commit:
https://github.com/norhap/Turquoise-...022933170633b0
my enigma2 commit:
https://github.com/norhap/vix-u5pvr/...4?diff=unified
Last edited by norhap; 05-02-20 at 21:03.
stephan94 (06-02-20)
stephan94 (06-02-20)
Hello Huevos,
I wish it were this reason, it would be understandable for me.
But with more than 14dB it is not a transalpine beam problem.
My place of reception is with 51dBW quite suitable to have a good signal (Antenna 1.20m)
Fearing this problem I tried before updating on this frequency with version 5.0.14 and everything worked
and after nothing.
My other images with Kernel 5.4 work without problem, even with a very old kernel (4.2) the signal is there.
Hello ,
this problem for the MIo4K with multistreams of 5 ° wB in high band 12500/12750 this confirms.
Tests have been made, with the same antenna and the same reception location, with an HD60 and a Hitube 4K Combo; all of these
frequencies are read and with programs and with a signal of + 15 dB.
Conclusions: the Edision Mio4k has a problem.