attached is a new bootloader for the HD51 reuqired to fix some issues with new recovery mode.
Copy to usb stick and flash as normal ......apparently should not impact current images
attached is a new bootloader for the HD51 reuqired to fix some issues with new recovery mode.
Copy to usb stick and flash as normal ......apparently should not impact current images
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
abu baniaz (11-06-19),Andy_Hazza (31-05-19),cwebb66 (11-06-19),johnrichard (30-06-19),khan888 (31-05-19),machare (01-10-19),norhap (02-06-19),Sicilian (31-05-19),Willo3092 (31-05-19)
this boot disable PIP:
Code:"Your box needs Bootloaderversion(s) v1.07-r19, v1.07-r21, v1.07-r35 to make compatible with Bootoptions!".
Should work fine with next release of OpenViX ... its not a ViX issue but lies elsewhere
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
norhap (02-06-19)
I would get it over with!!!
If you have to go into recovery, there are apparently issues until this bootloader is installed.
Cannot say more, as the only comment has been "to fix recovery issues"
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Joe_90 (11-06-19)