My technomate nano-2t freezes, if i leave it in standby with date on display, i notice time has froze and i have to switch off and on, is this in settings?
My technomate nano-2t freezes, if i leave it in standby with date on display, i notice time has froze and i have to switch off and on, is this in settings?
Do you have any services running in standby like abm or epg setup?
Where do i check this please?
You should know if you have set the receiver up?
ABM settings can be found in Tuner & Config > AutoBouquetsMaker and depending what you are using for your EPG, could either be CrossEPG or EPG Importer. Also where are you storing your EPG data?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Ermmm? This is new to me, can tell you what ive done, factoring reset, click autobouqeut maker... then did scan for channels thats it.
If I were you I’d start from scratch. Install a new image and setup as new. ViX no longer supports your receiver so maybe look at OpenATV which still supports it I think.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Will import it uaing what abu said ftp ... usb not reading 3 sticks, do i import the whole update folder?
How to USB flash guide here: http://www.openvix.co.uk/openvix-bui...TM-Nano-2T.pdf
OpenATV image for the Nano2T:
Code:http://images.mynonpublic.com/openatv/nightly/index.php?open=tmnano2t
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
trying to update from the hdd/imagebackup folder not sure what i should be dumping in there of the openatv, vix keeps freezin so need update
Get this errorIMG_5255.jpg
I am closing this thread. Impossible to follow two threads. Please continue in the other thread