please anyone able to help? seems receiver tuner has gone bad.
I have flashed without settings restore, connected another receiver to same signal wire and it works ok, hence it isnt the wire.
Attached images are the tuner settings
please anyone able to help? seems receiver tuner has gone bad.
I have flashed without settings restore, connected another receiver to same signal wire and it works ok, hence it isnt the wire.
Attached images are the tuner settings
Edision OS MEGA TRIPLE TUNER COMBO
Edision OS MINI+ Plus
Formuler F1
Triviar Alpha
I thought you were on an older image but will ask what version is your abm as you might have to delete it and reinstall from plugins feed.
Last edited by cactikid; 07-01-19 at 20:52.
What were your tests on the other receiver?
Is the LNB a sky quad LNB. If so, did you have two receivers (switched on) connected to the LNB?
Yes it's sky multi room connection, one receiver in the lounge the other in the room.
The formuler belongs to my friend, he had the problem so i asked he bring it over to mine to check.
I disconnected one of my receiver and then connected the formuler, tune failed.
I reconnected my receiver and my receiver works ok.
Edision OS MEGA TRIPLE TUNER COMBO
Edision OS MINI+ Plus
Formuler F1
Triviar Alpha
Did you connect signal wires to both tuners on the formuler?
Do you have sky q?
cactikid (08-01-19)
When you connect up your box to feed is it set to 28.2 and not another sat ,some people move the dish to point to another sat.
Can the other box run a non abm scan to see if it finds channels on that sat.
Some Sky quad LNBs have a weird fault. It only exhibits itself when two receivers are connected. To rule this out, power off the other receivers at the mains, connect the formuler to the same wires as the official receiver. In tuner configuration, set both tuners to automatic. If they both succeed, then the tuners are fine.
I will try this later this evening and update here.
My current set up:
Sky quad LNB with sky dish, signal wires terminate in lounge and bedroom.
I use Triviar Alpha in lounge and edision os mega in bedroom (official receiver is decommissioned)
Both receivers work simultaneously without problem.
It's only my friends formuler receiver that is having this tune failed issue when connected to the signal wire in both mine and his house.
Edision OS MEGA TRIPLE TUNER COMBO
Edision OS MINI+ Plus
Formuler F1
Triviar Alpha
cactikid (08-01-19)
Make sure you try one tuner at a time.
Are you certain the particular port of LNB is used/activated? Sometimes they fail on a particular quadrant of spectrum. May be an idea to test with the cable that you are using on tuner A and confirmed to be working to avoid the messing around with other receiver.
Last edited by abu baniaz; 08-01-19 at 09:06.
cactikid (08-01-19)
Seems to be problem with ABM, uninstalled then reinstalled and tuners working again
Edision OS MEGA TRIPLE TUNER COMBO
Edision OS MINI+ Plus
Formuler F1
Triviar Alpha
I have similar problem with OS Mega all started a few months back solved most from advise here but annoying thing is Im missing 3 channels, "no tune" , I have now got new setup , new ,bigger dish,universal quad LNB , but , three that I watch are gone ,Blaze,Travel ,Food Network , really doing my head in ,,if anyone can help.. If It helps I had lots more "Missing" but uninstalled ABM and reinstalled ,done trick .
Also when trying to do blind scan , it will say tuner nor configured correctly ,, noticed that in "set up " the top range is set for 1275mhz but when I get scan going , in the top of page its says 1175mhz ,, is this just a typo or actual limit ,, glitch with my machine or Vix? running 5.1 ,,, Cheers in advance