it is possible to do what you want to do with STBEMU, I have one upstairs and downstairs on same sub, just cant use both at same time.
it is possible to do what you want to do with STBEMU, I have one upstairs and downstairs on same sub, just cant use both at same time.
So the first thing to do is write a complaint to the supplier.
Clearly, since I said I've written one...Now if it's possible ,cdo you know how?
...and I've successfully searched my archive to find it.and if you do are you wiling to tell me?
The problem is that it needs a compiler to build it (Vix doesn't actually come with one, but it's simple to get one) and you need to be able to set an environment variable just for the application which actually checks the MAC address.
I'm assuming that this is a MIPS chipset (difficult to determine from a quick web search - it has a Broadcom 7424 chipset, but the Broadcom web site fails to mention the architecture for it!).
So if you PM me the MAC address you want, and the physical name of the network interface (eth0, wlan0,...) I'll compile it for you.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
wambam (19-11-18)
I had a solo 2 that reported no Mac address & used kill certain routers.
There was a network file on the box you could edit to spoof a Mac address, can't remember what it was tho but should be an easy solution.
I'm away at the moment so can't check any e2 box, but as far as I remember the VU vix builds come with a set Mac address option since then.
If you can find out which file that alters, you might be sorted.
No, it won't. He wants to be able to run box A with the MAC from box B. That means that any and every time he wishes to do this he has to:
- switch off B and ensure it stays off (no waking up for any recording)
- start up A
- login to A and edit the MAC-setting file
- reboot A
- use A
- when finished using A, login to A and edit the MAC-setting file back to its own seeing
- switch off or reboot A
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Must be a plugin. A lot of arsing about if you ask me mind!
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
As he said he wants to do.
Shouldn't need to set it every time.
Try something like this in telnet when logged into the box:
Replace 00:01:02:03:04:05 with the MAC address you want.Code:ifconfig eth0 down && ifconfig eth0 hw ether 00:01:02:03:04:05 up
If it works, find the startup script to put it in.
Last edited by judge; 17-11-18 at 14:54.
wambam (19-11-18)
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
I haven't tested this so make image backup beforehand...
edit: /etc/network/if-pre-up.d/nfsroot
Below the 'nfsroot=0' line add following:
Obviously change xx, etc to mac you wish.Code:if [ "$IFACE" = "eth0" ]; then /sbin/ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx fi
As mentioned by others, you can't have same mac on same network at same time so ensure other box if powered off.
It also assumes you're using eth0 interface which for LAN connection then you likely are. If WiFi then you may have to amend 'eth0' line accordingly (use 'ifconfig' to get details of interface name).
Last edited by bbbuk; 17-11-18 at 23:59.
wambam (19-11-18)
On OpenVIX I just looked in
/etc/network/if-pre-up.d and see this inside hwmac
if [ -f /etc/enigma2/hwmac ]; then
macadr=`cat /etc/enigma2/hwmac`
That then tells me another hwmac file in /etc/enigma2 with just mac in with chmod 755, restarted box and then mac was changed to the mac I chose to emulate my Stalker subs (with no clashes in network router macs), then restarted box
Thats all I did anyways, easy peasy.
Note - this was done on Octagon SF8008 and Mutant HD51 not the machine you are asking for and just what I did.
Last edited by danny121pt; 18-11-18 at 08:45.
Andy_Hazza (18-11-18),twol (18-11-18),wambam (19-11-18),widar (19-11-18)
Thanks guys appreciate the help.
On my Duo2 I can change the Mac in Menu, Setup, Network, Device Setup!
Network MAC settings...
I made a note of my original mac before changing to another on my network & yes there was a conflict which was resolved by placing the other box on the same mac in this case my Vu Duo into Deep Standby.
And yes I was able to achieve what you desired. (Run a certain plugin on 2 devices via the same mac)
And I returned to the original mac after I completed the test...
Vu+UNO 4K SE [OE-Alliance-4.4 Firmware 5.4-010-Build Oscam-r11693-798][with keys]
Vu+DUO 2 [OE-Alliance-4.4 Firmware 5.4-003-Build Oscam-r11572-798][with keys]
Vu+SOLO 2 [OE-Alliance-4.3 Firmware 5.3-039-Build MGcamd]
Vu+SOLO SE [OE-Alliance-4.4 Firmware 5.4-003-Build MGcamd]
That change Network Mac settings is on all images I use, bar OpenVIX and OpenPli, and OpenEight on SF8008
OpenATV/PurE2/OpenHDf/OpenDroid/OpenSPA etc all have change network mac in Network menus.
Maybe its something OpenVIX could consider adding into there images in future?