Since i updated to 5.1.003 I've lost tuner "I" which ran my motor feed .Only showing A-H now with no option to add my motor.
Since i updated to 5.1.003 I've lost tuner "I" which ran my motor feed .Only showing A-H now with no option to add my motor.
Assuming you are using the dual fbc tuner , you only have 8 „tuners“ A-> H (8) so how did you get a 9th I???
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I've no idea but multi sat was on I
There was a driver update in 5.1.003 to fix hybrid tuner modules.
Can you try a fresh flash and setup please. Also please check that you scrolling right to the bottom of the tuner setup screen.
I'll check later today too, might need reporting to GB.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I've got A for 28.2 ,put B for motor and changed all the rest to 28.2 seems to have solved it .
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Have the added tuner ,it was fine before I updated image as I had the motor on tuner I but now that's gone .
Tuner A 28.2 e fixed dish separate cable.
Tuner B 28.2e fixed dish separate cable.
But it's how to get motor working ,if I put on C it's showing dish as moving but it's not ,it seems to be not sending power to dish from C .It was when I was an option.
Looks like last driver update may have broken extra single satellite tuner modules, I'm checking it out now and will report to GB.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
hilly (14-12-17)
You need to upload a picture of your tuner config and also confirm clearly which tuners you have on the box.
At the moment its hard to know whether you are talking about a 3rd tuner ((C) or using one of the positions on the dual FBC tuner.
If you really have an additional plugin DVB-S2 card, I would say that is the issue as there is no Dvb-S2 plugin card specifically for the Giga 4K‘s at the moment, or none that work with the current drivers - if you are using a card what is the model number?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
It's a WoS fitted 3rd tuner only maybe 3 months old .Will try pics later when mrs is out.
Contact WoS, apparently this tuner module is not functioning correctly with 4K models, they're trying to fix drivers. January a new S2X tuner module is coming.
Open a support ticket here: https://www.world-of-satellite.co.uk/support/
WoS will exchange the tuner for S2X once released.
If you need to use now, revert to an earlier image.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
IMG_20171214_141723.jpgIMG_20171214_141702.jpg
Still uploaded photos but have opened a ticket with WoS .Cheers
Stef got straight back will change tuner when possible .cheers