I'm using a modified version of IM, but that is my own choice, and if I brick my receiver then I have to face that consequence.
Sent from my iPhone using Tapatalk
I'm using a modified version of IM, but that is my own choice, and if I brick my receiver then I have to face that consequence.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
ok I will use a usb from now
but as I said every time I have had a green flashing symbol for updates I have downloaded via image manager pick the image I just downloaded press ok on remote and it go's to Ofgwrite tool and flash's then I restore if possible and I have always done it this way but not anymore
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
alan1812 (04-03-17)
yes I know that but that's the way I have always done it that's just my choice but couch flashing as always worked fine for me but I will be downloading to usb from now on
To be honest Andy thats a fair bit different from what you said above and hope you can see how I was a little bit confused by what you were saying about the blue button restore. .
I'm aware that the Arm receivers cant be couch flashed.
Il stick to USB flashing my HD51 until there is a formal change to be couch flashing procedure.
Sent from my iPhone using Tapatalk
Last edited by garryboy; 04-03-17 at 14:08.
this is the correct way ive always flashed my solo 4k by this method, as we all know things get broken sometimes when updating ota or im, use the usb port at the front press the little button to the left it is called power button dont get confused about the blue circul.
How long should it take on solo4k for the flashing process to take? Been saying flashing image on front screen for about 5 minutes, feels like something has gone wrong here?
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
No mate, it will be the USB. I can't for the life of me find my reliable one lol.. It started the process but then got stuck, tried a few times but same outcome so have now stopped don't want to damage box.
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
Flashed my HD51 via USB. Saved setting backup to Hd.
Was back up and running in 5 mins
Sent from my iPhone using Tapatalk
As long as it doesn't touch the boot loader I can't see why this would be unsafe. The USB flashing can then be a backup if it doesn't work.
Can anyone confirm if the boot loader is safe?
On my solo 4k open ATV 5.3 to 6.0 couch flashing appeared to work for me although did restart to use a flashing utill!! However it never actually flashed the new image. when it rebooted I was still on the old image!!! I was still on the latest 5.3. USB flashing worked though.
If you have to use a Usb Couch flashing will never work as you must get up to press the power button behind the flap to start the flashing process. though deep standby is handy so you don't miss the flash prompt. you press that power button once to power up again when the flashing prompt comes up.
Last edited by Ragnarok; 16-03-17 at 16:02.