Has anyone got a USB wireless adaptor working on their HD51.
I have a TP link adaptor that is working on my xtrend but cannot get it to work on the Hd51.
In the network setup it is showing but its named rt8lxxxu. I presume its a driver issue.
Has anyone got a USB wireless adaptor working on their HD51.
I have a TP link adaptor that is working on my xtrend but cannot get it to work on the Hd51.
In the network setup it is showing but its named rt8lxxxu. I presume its a driver issue.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
You need to talk with fat-tony or birdman who have been working this for another adapter and found a solution
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Ashley69 (09-12-16)
Cheers twol.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Last edited by birdman; 10-12-16 at 04:51.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Thanks Birdman.
rtl8192cu is installed already. Still not working correctly.
Just can't get it to see any wireless networks.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Thanks birdman.
How do I check if its installed and if not how do I go about installing it.
Regards
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
- Open OpenWebIF on the box in a browser.
- Click on Settings (under Extras) and then Packages.
- Click on All.
- Click on K
- Look for kernel-module-rtl8192cu. If it is bold it is installed. If it isn't then click on it to install it (you'll get a pop-up to confirm that this is what you want).
If you installed it, reboot the box.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
I have done what you have instructed. Clicked to install and the message pop up comes on the screen. I press Ok to install and then nothing appears to happen.
Thanks
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
I would use a cheap set of home plugs from asda or tesco just plug and play and hassle free
All PM,s asking about c/s on cable will be ignored and reported to forum staff!
I have rebooted the box and went back to openwebif and its still showing not installed(not in bold)
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Telnet/ssh into the box and type:
and check what it points to. If it ends with rtl8xxxu.. rather than rtl8192cu... then type:Code:ls -l /sys/class/net/wlan0/device/driver
Reboot the box.Code:opkg install kernel-module-rtl8192cu
Login again and type:
and check what it points to.Code:ls -l /sys/class/net/wlan0/device/driver
Last edited by birdman; 10-12-16 at 21:52.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Hi If home plugs are an issue , I have used a 5 in 1 router as an access point connecting by wifi my home router and by cable to my HD51 , had no problems at all
the router I used less than £15 https://www.scan.co.uk/products/edim...r-wisp-2x-high
Ashley69 (11-12-16)
Or like this one,
https://www.amazon.de/Vonets-Net-X-V.../dp/B004CX6P3M
Vonets / Net-X VAP11G WiFi-Bridge / WLAN Bridge 54Mbit
or the new type 300 mb
https://www.youtube.com/watch?v=N-SeYJMzb24
http://www.vonets.com/ProductViews.asp?D_ID=86
VAP11G-300/VAP11G-300
Last edited by Maxxxx; 11-12-16 at 12:15.
Ashley69 (11-12-16)