...try 50Hz, that's what I use.
...try 50Hz, that's what I use.
champs4life (06-10-16)
champs4life (06-10-16),kryton (06-10-16)
champs4life (06-10-16)
UK TV is broadcast at 50Hz so if your box is set to anything else the box may/will be performing some format conversions which often leads to unwanted artifacts. A 50 to 60Hz conversion may result in dropped frames which may make scenes with motion look 'jerky/jittery'. Outputting at 24Hz from a 50Hz source may have more unwanted artifacts such as having to duplicate frames every so often, which a can also result in a stuttering picture .
Wat are the AV setting on you box? Menu -> set-up -> system -> a/v settings?
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
champs4life (06-10-16),kryton (06-10-16)
So could being set to 24HZ be causing the jittery picture I am having on all channels. As it seems sluggish and slow. Doesnt look smooth.
Again on the old image this wasnt a problem everything looked crisp, sharp and smooth.
I have it set as 1080i multi. These were settings I was told to apply.
Multi should work but setting 1080i 50Hz suits UK television broadcasts.
Change multi to 50Hz and press green on the remote to save.
I've found occasionally that the software gets lost after changing the AV settings so turn off your box at the mains for a minutes and then switch back on.
Now check that the TV is receiving 50Hz.
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
champs4life (08-10-16)
why are you having your picture just scale? as mine are letterbox for 16.9 and pillarbox for 4.3 looking at my et10000 on panny tv.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)