Aha OKi well thats explains it all the file is a folder that has to be extracted after that you be able to se all 3 files, tack för hjälpen
Aha OKi well thats explains it all the file is a folder that has to be extracted after that you be able to se all 3 files, tack för hjälpen
Sicilian (30-05-10)
Inga problem, alltid roligt att kunna hjälpa till
Sorry, had to reply in swedish
I'll re-pack the file and re-upload so it extracts into its correct folders.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Followed this perfectly when I did my first flash. However, I made a few changes that the box wouldn't keep, so I wanted to reflash it...
Put the stick in to the front usb port, and it came up very briefly with "Reading USB" or whatever message, and then started to load the previous image...
Had to remove the usb stick in the back of the machine for it to actually flash using the front usb... Now, I'm likely to flash it using the front usb for ease of use, but don't really wanna have to keep removing the rear usb stick to do this... Is there any way to make it read the front usb first (as it looks to me like it's reading the rear usb, thinking no file to flash, and then starting up...)
No, you have to remove the rear stick when re-flashing.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Sorry if this the wrong thread to ask this, but how do I keep all my current settings and try out a new image?
Since receiving the box a week ago the only thing I have done is flash it with the latest Pli image.
This morning I thought I would try the latest official image Ver4.8 which I got from your link and flashed, but of course it just effectively starts from the beginning asking for language, tuner settings etc.
Fortunately I had followed your guide to taking a backup so was able to flash back and everything was as before.
Having spent ages setting up different satellites for the positioner is there a way to save some settings files first, flash with the official image, then apply the saved settings on top?
Thanks
Hi,
I downloaded the VIX image but there is two files in the section:
(1) VIX_V1.0_Team_Image.nfi
(2) VIX_V1.0_Team_Image.zip
What is the purpose of the .nfi things?
Am I right in thinking that I need to extract the .zip folder on the USB Stick duo??
Thanks
hi shawi plz help me with vu+duo.i try to do flash with nfi image but no luck.so plz can u tell me total method.very thankfull.or my yahoo id han_par
i m avilable on yahoo 24/7 so plz help me for this.
You have to put the vuplus map on your usb stick, not the nfi image for flashing!!
no i m using nul modem with nfi image.
You can do that with VuUtil, power of the box on the rear, choose the right comport, fill in the ip of your pc, fill in the ip of the vu or choose dhcp, then press connect if the connection is ok, you see the message Serial port open success. Please turn on your box.
Then switch it on at back and got to the place where the nfi file is located and flash.
Last edited by Past2Present; 21-09-10 at 15:03.
i m doing exactly what u said but it says continu and after exit vuutil program nothing happend bro.
After flashing you get the message Complete flashing all, now first click on disconnect en then press exit, turn the box off and on.