as requested duo cfg
as requested duo cfg
This is your issue. You are DDOS yourself.
Change it toCode:L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
Code:L: { 00 }
so if this file is used on all my vu boxes i need to adjust the others also.
yes otherwise your DDos'ing your self.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
cactikid (14-06-15)
think i must have lost the plot box is running a cfgreflash to a newer image after i save my channel list
did the mg_cfg file change anytime as remember when first setting up 2 things needed changing then
Last edited by cactikid; 14-06-15 at 21:25.
same issue with no internet connection since box was bought in may 2015 from wos.
whats tried different images from hades 10-hades 14,apollo 166,open pli.
always reflashed with no settings restore.
new lan cables added and straight from router to box.
lost count how many reboots of box and router and network restarts to get a connection
tried for over 1 hr even switching dhcp off and adding the network manually= no connection
if box is powered off for 1/2 hour or more box will connect so suspect faulty lan port/re dry joint?
box had a connection last night with kodidirect and gone again with no connection again today.
think time to contact wos
update box sent back for testing fault found and new updated box coming soon
Oh dear,
I'm sorry to have to report i am having exactly the same issue since yesterday evening, with my brand new Xtrend8000, which only arrived from WOS last Saturday.
It had been working perfectly well until then.
As others have reported if the box is turned off at the switch on the rear & left for 2/10 minutes on restarting the internet connection is once again working correctly!
I will monitor both my box & this thread over the next few days, but It looks like it may have to be returned to WOS after Xmas for a replacement unit, or if this bug is becoming more common, i may even relucatntly consider opting for another brand of box altogether.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
The router is working perfectly when the error occurs the et8000 is not found in the router ethernet LAN-Side devices.
However as can be seen in the attached image, if the et8000 is unplugged from the mains or turned off at the switch on the rear of the unit & left for 5/10 minutes the internet connectivity issue is temporarily resolved & it will then show in the
router ethernet LAN-Side devices.
It is definitely not a problem with the router, but either an issue with the latest openvix image - (openvix-3.2.030.release-et8000) or is a hardware issue with the unit itself.
xt8000-router.jpg
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Emailed WOS yesterday and this is their reply
Quote> This is a software issue, we've had a few (very few).
Xtrend are aware of the issue and are in the process of creating a bootloader to fix the issue.
In the meantime, if you need to restart the receiver, put the unit into deep standby, then take out of deep standby by pressing standby on the remote. Unit should re-start with network all working fine. <Unquote
I have tried this fix and it works.
Must say WOS were very prompt in their reply.
That's great news & thanks for the Deep Standby tip thomsork!
I'm extremely happy to hear Xtrend are aware & working on a patch to resolve this matter, because i gotta tell you when this little box of tricks is functioning correctly it is a "Flying Machine" & a top bit of kit.
As far as WOS are concerned, although i have never yet had personal experience dealing with WOS re any problems (Thought this was going to be the 1st) I have never heard or read a single bad word said against them when it comes to the service they provide!
The after sales service/care WOS provide seems to be 2nd to none