fresh install of 131 on a gigablue se and running inbuilt auto bouquets and its crashing while scanning.
now disabled in built ABM and using Laisers which is working great.
Last edited by hilly; 30-01-15 at 20:13.
What settings are you using?
Please provide every small detail so that your exact setup can be reproduced.
Freesat no
sly rep yes
sly rep sd
sly UK yes
sly UK tyne sd
sly UK sd no
And then I hide a few like religion, international and start scan ,
Configuration is
setup expert (lol)
Schedule scan yes
1 am
Keep all yes
add prefix yes
place top
skip services yes
include non indexed no
show extensions no
Can't reproduce. Can you tell us exactly what you are hiding. Also have you edited any of the provider's files (section numbering)?
Also, please turn on debug log and post the log.
Will do this tomorrow as on the pi. ..drink cheers
I haven't changed any files as a brand new flash.
I tried your setup apart from the hidden section on a Nano-SE without a problem.
Can you also do following? (this is in order to identify/fix your issue)
1. Attach your settings file. It is called "settings" and located in /etc/enigma2/
2. Perform a conventional single satellite scan on the tuner ABM was using and report back with how many channels you get.
ran another scan without any hidden sections and just the same.
cant seem to upload settings file on here.
Done a fresh flash to 120 and ran a scan on setup finding 845 channels normally over a 1000 .Then ran ABM and it found 20 irish then came up could not find data.
upgrading now to 131 and will scan again.
I have other boxes on this dish which are scanning fine also checked cable connections.
Last edited by hilly; 31-01-15 at 11:46. Reason: spelling
Settings file would have to be compressed/zipped. Debug log should be fine unzipped.
I've give up mate thanks , got it setup with lazier abm .Also tried a set channel list which worked well.So I have no idea what is wrong.
I have attached settings file.
EDIT by Abu Baniaz. Edited settings file and posted values in thread
Code:config.Nims.0.diseqcA=282 config.Nims.0.diseqcB=3601 config.Nims.0.diseqcC=3601 config.Nims.0.diseqcD=3601Code:config.autobouquetsmaker.keepallbouquets=false config.autobouquetsmaker.addprefix=true config.autobouquetsmaker.showextraservices=true config.autobouquetsmaker.providers=sat_282_sky_uk:sd_tyne:157:
Last edited by abu baniaz; 31-01-15 at 14:45.
Posting Permissions
Reply With Quote
