tm nano t3 stopt working put new batys in still no joy
tm nano t3 stopt working put new batys in still no joy
Have you looked at remote using your cameraphone to see if it is sending a signal? This is to establish whether remote is working or not.
You used to be able to point a remote at an AM radio and here beeps, don't know if that still works.
Sent by pressing the screen on 1 of my Apple devices, cuz that's how I roll.
how do I do that on my phone abu im lost mate
What image are you using? Have you tried a fresh re-flash?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
iv dome that its working shall I reflash the box
yes you can try flashing the receiver.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Just flashed Apollo 153 image & same no response from remote control weird