No luck with the 4D image, second tuner still isn't showing anything
Poor show when a £199 box has a dodgy 2nd tuner
Wouldn't mind but will most likely have to wait till after new year now before getting a replacement box which is frustrating
Just wondering if anyone else has had this problem
Tried swapping lnb feed cables about on the box, tried moving sockets on the lnb to see if it was maybe just a dodgy feed, even tried several different images. Tuner B just refuses to pick up a signal.
Box was only delivered yesterday (23rd Dec) just a shame if the tuner is dead because I will have to wait till 5th Jan to get a new one now.
Is there anything else I could possibly try?
is tuner b setup correctly for the sat you are using,recheck tuner configuration?
recheck your f connector and you dont have a splitter on the cables.
No splitter on the cables, they came straight off a Sky setup, so the cables go direct to the LNB, and the f connectors should be fine as both feeds get 95% strength on my old sky box.
Tuner B is setup correctly as far as I can tell
looks correct may need to see what others suggest and the core of f plug looks ok as i had that on a duo for weeks and blank recordings
Going by your other thread, you have tried everything. Send a message to the seller and he'll get back to you soon.
Try disabling all tuners but tuner B and see if it picks any thing up, also never assume any thing, if in doubt remove and refit the f-plugs after all its a two minute job and will guarantee they are fitted and working correctly, instead of just assuming so.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I had the same problem with my nano2 super by trial and error i stripped off the outer shield wire on the b wire and everything now works perfectly it was almost like it was shorting it out
Please see this thread so OP does not have to keep repeating himself
http://www.world-of-satellite.com/sh...ebif-Streaming
I had the same problem with my nano2 super by trial and error i stripped off the outer shield wire on the b wire and everything now works perfectly it was almost like it was shorting it out
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Thanks abu baniaz for linking to the other thread e-mailed the forum sponsor yesterday but no response yet, I understand he is closed for the festive season which is why im trying to resolve this myself as I don't really want to wait till 5th Jan for a replacement
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
i had to totally remove the shield wire and just have the copper centre in place completly wierd i know
Last edited by jwestwood74; 24-12-14 at 21:55. Reason: spelling